Auto Tuning
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
TV AV
MENU
EXIT
1 | Plug the TV into mains socket and switch On |
●You can now use the remote control to turn On the TV | |
| or switch the TV to standby mode. |
| (Power LED: On) |
2 | Select your area |
|
Select State / Territory | select |
New South Wales / Australian Capital Territory |
| |
Victoria |
| |
Queensland |
| |
South Australia |
| |
Western Australia | set | |
Northern Territory | ||
| ||
Tasmania |
|
3
RETURN
4
Select Auto Scan Type
Auto Scan Type
All Channels
Digital TV Channels only
Start Auto Tuning
Auto Tuning
| Digital TV Scan |
| CH 6 |
| 69 |
|
| Analogue TV Scan | CH 0 |
| 75 |
| |
| This will take about 6 minutes. |
|
|
|
| |
| RF Ch | Channel Name |
| Type | Quality |
|
| 62 | CBBC Channel |
| Digital TV | 10 |
|
| 62 | BBC Radio Wales |
| Digital TV | 10 |
|
| 62 | E4 |
| Digital TV | 10 |
|
| 62 | Cartoon Nwk |
| Digital TV | 10 |
|
| 29 |
|
| Analogue TV | - |
|
| 33 |
|
| Analogue TV | - |
|
| Digital TV: 4 | Analogue TV: 2 |
|
|
|
|
Searching
EXIT
RETURN
select
●Auto Tuning will start to search for TV channels and store them.
The sorted channel order depends upon the TV signal, the broadcasting system and reception conditions.
5 | Select the viewing environment |
Please select your viewing environment. |
HomeShop
●“Home” is the recommended mode for viewing at home. Select “Home” for optimal picture / power consumption. “Shop” is for
Home: “Viewing Mode” is set as “Normal”. (p. 24)
Shop: “Viewing Mode” is set as “Dynamic”. (p. 24)
select
set
Auto Tuning is complete
If you select “Shop” by mistake Return to the “Home” or “Shop” Selection menu
Automatic Demo | RETURN |
|
OffOn
●Once you press the OK button in this menu, the TV is set to Shop mode.
Please reset all settings to set to “Home” mode. 
“Shipping Condition” (p. 32)
Select “Home”
Please select your viewing environment. | Auto Tuning is complete | |
Home | Shop | |
select 
set
12