Panasonic TH-L42S10A manual Displaying PC Screen on TV, Advanced, Setup

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.

You can also listen to PC sound with the audio cable connected.

●To connect PC p. 44

POWER

INPUT

TV AV

ASPECT MENU OFF TIMER

EXIT

OPTIONRETURN

R G Y B

TEXT STTL INDEX HOLD

1

2

Select the external input

AV

Select “PC”

Input Selection

AV1

AV2

AV3

PC

HDMI1

HDMI2

HDMI3

TV

access

select

●Corresponding signals p. 48

●If “H-freq.” or “V-freq.” is shown in red, the signals may not be supported.

To return to TV TV

PC menu setting (changed as desired)

Menu	Item			Adjustments / Configurations (options)
		R-Gain	Adjusts the white balance for red areas
Picture	Advanced	G-Gain	Adjusts the white balance for green areas
		B-Gain	Adjusts the white balance for blue areas
	PC
	Settings	Gamma	(2.0 / 2.2 / 2.5)
		Reset PC	Press the OK button to reset to the default Picture settings
		Settings
			Switches to a wide view
		Input	●VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
		Resolution	XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
			●Options change depending on signals
		Clock	Set to the minimum level if noise occurs
		H-pos	Adjusts horizontal position
Setup	PC
		V-pos	Adjusts vertical position
	Setup
		Clock Phase	Eliminates flicker and distortion		●Set to the minimum level if noise occurs
			●Adjust after Clock adjustment
			PC sync signal type (H & V / SOG)
		Sync	●H & V	: Horizontal and Vertical sync from your PC (Most common sync format)
			SOG	: Sync on Green sync from your PC
		Reset PC	Press the OK button to reset to the default Setup settings
		Settings

●Other items p. 24 and p. 25

Displaying PC Screen on TV

Restore Settings (Shipping Condition)

Advanced

33