Panasonic TC-P58V10 quick start Setting, Example of Network Camera connection

Example of Network Camera connection

Back of the TV Network Camera

	Ethernet
	cable
	LAN
	Internet equipment
Cable/DSL
modem	Router
	Internet

Set Internet setting (LAN) for connected equipment with Internet equipment if you need to.

*You cannot set Internet setting from this TV

Display Menu

Select “Setup”

	Menu							select
		Picture						ok
		Audio
		VIERA Link
		SD card
		Closed caption
		Setup
		Select “Network cameras list”						select
Network	Setup				2/2
	VIERA Link settings
Camera	Network setting							ok
setting	VIERA CAST setting
	Network cameras list
		If there is no registered camera
		Select “Yes” to start search						select
	Please refer to camera’s settings and enable its link
	mode.
	Start searching for network camera?
	Yes			No				ok
		Set Network Camera setting
								select
	Network cameras list
	Camera name		Model				Status Default
	Camera 1		BL-C210A				Connected
	...		...		...
	...		...		...
	...		...		...
	...		...		...
	...		...		...
	...		...		...
	...		...		...
		Select	OK
		Find cameras	RETURN				Delete
	R				G
	B	Disconnect			Y	Default camera

■Network Camera setting operation

Network cameras list

Camera name		Model			Status	Default
Camera 1		BL-C210A			Connected
...		...	...
...		...	...
...		...	...
...		...	...
...		...	...
...		...	...
...		...	...
	Select	OK
	Find cameras	RETURN			Delete
R			G
	Disconnect			Default camera
B			Y

“Please refer to camera’s settings and enable its link mode. Start searching for network camera?” “Yes” to start camera search.

Before you start to search for a camera, switch the camera to registration mode. (For this operation, please refer to the operating manual for the Network camera.)

Search condition also depends on “Network setting” (p.44)

“Remove camera information?” “Yes” to delete camera information.

“Disconnect to camera?”

“Yes” to delete camera connection. “Disconnected” will be displayed in “Status”

“Set this camera as default camera?” “Yes” to set to the default use.

Displayed “(Default)” next to camera name.

(Available only when reconnecting) “Connect to Camera?

“Yes”: “Connect” will be displayed in “Status” (Attach up to 8 Network cameras simultaneously)

Viewing

Network Camera

31