Panasonic TC-P58S2, TC-P65S2 quick start Auto channel setup ANT/Cable setup, Start First

Auto channel setup (ANT/Cable setup)

Select the connected Antenna in terminal

ANT/Cable setup		Step 3 of 6		Not used: Go to
Cable	Antenna	Not used		(Label inputs)
			select
		Cable In
		ANTENNA
		ANTENNA	OK
		Cable In

Select	OK	Select “Not used” when viewing TV via
	RETURN	Satellite receiver or Cable box. Note: Select
		“Cable” when viewing via Cable DTA Box.

Select “Not used” when no wire is connected to the “Antenna/Cable” terminal. Typical when a Cable/Satellite box is connected to a TV input.

Prevents accidental tuning to an unavailable signal.

Quick

Select “Start”

Auto program Step 4 of 6

Skip: Go to

Guide

	Start		Skip
	OK	Start scanning for channels via the TV’s
Select	RETURN	built-in tuner. Select “Skip” when viewing TV
		channels via Satellite receiver or Cable box.

select

OK

(Label inputs)

Start First

Press to return to the previous screen

Start scanning the channels

(Available channels are automatically set.)

Auto program

Progress	8%
Number of analog channels	10
Number of digital channels	0

Press RETURN to quit

RETURN

Complete the Auto program setup

Completion message is displayed when the Auto program scan is successfully completed.

Auto program	OK	If there is no available
Number of analog channels		channel, return to	-
	10	(ANT/ Cable setup).
Number of digital channels	0
		“Not used” will be selected.
Auto program completed.

Press OK to continue.

OK

RETURN

Operation of the EXIT button during “First time setup”

Press the button once to display confirmation screen. Press again to close confirmation screen.

[EXIT confirmation screen]

Are you sure you want to exit the First Time Setup?		Yes	Exit “First time setup”
		No	Return to the original screen
Yes	No

To repeat the First Time Setup, select “First time setup” in the Setup Menu.

Time Setup

15