Panasonic TH-L32D25M manual Picture Sound

Menu

Picture

Sound

Item	Adjustments / Configurations (alternatives)
	Picture Noise Reduction
P-NR	Automatically reduces unwanted picture noise and flicker noise in the
	contoured parts of a picture (Off / Min / Mid / Max)
	● Not valid on PC signal
	Makes still or slow moving pictures look more vivid (Off / On)
	● Occasionally, while viewing still or slow moving pictures, colour
3D-COMB	patterning may be seen. Set to “On” to display sharper and more
	accurate colours.
	● For PAL or NTSC signal reception only
	● Not valid, on Component, PC, HDMI and Media Player
	Turns the screen off when you select “Off” (Off / On)
Panel	● The sound is active even if the screen turns off.
	● Press any buttons to turn the screen on.
	● This function is effective in reducing power consumption when listening
	to a sound without watching the TV screen.
Advanced Settings Sets the detailed picture settings (p. 31)
Reset to Defaults Press the OK button to reset the present Picture Menu settings to the default.

Selects basic sound mode (Music / Speech / User)

●The selected mode affects all input signals.

	Music	: Improves sound quality for watching music video, etc.
	Speech : Improves sound quality for watching news, drama, etc.
Mode	● In Music and Speech mode, you can adjust “Bass” and “Treble”
	settings, and those settings will be stored for each mode.
	User	: Adjusts the sounds manually by using the equalizer to suit your
		favourite sound quality.
	● For the User mode, “Equalizer” will appear on the Sound Menu instead
	of “Bass” and “Treble”. Select the “Equalizer” and adjust the frequency.
	“Equalizer” (below)

Bass	Increases or decreases level to enhance or minimise lower, deeper sound output
Treble	Increases or decreases level to enhance or minimise sharper, higher sound output
	Adjusts the frequency level to suit your favourite sound quality
	● This function is available when “Mode” is set to “User”.
	● Select the frequency and change the frequency level by using the cursor button.
Equalizer	● If you want to enhance the bass sound, raise the level of the lower
	frequency. If you want to enhance the treble sound, raise the level of the
	higher frequency.
	● To reset the levels of each frequency to the default settings, select the
	“Reset to Defaults” by using cursor button, and then press the OK button.
Balance	Adjusts the volume level of right and left speakers
Headphone Volume Adjusts the volume of the headphones
	Surround sound settings (Off / V-Audio / V-Audio Surround / V-Audio
	ProSurround)	: Provides a dynamic enhancer to simulate improved
	V-Audio
Surround	V-Audio Surround	spatial effects
		: Provides a dynamic enhancer of width and depth to
		simulate improved spatial effects
	V-Audio ProSurround : Provides a three-dimensional sound space with
		digital reverb effects

●Switching is also possible by the Surround button on the remote control (p. 10). Volume Correction Adjusts the volume of individual channel or input mode

	Adjusts the low frequency sound (Over 30cm / Up to 30cm)
Speaker Distance	● If the back space between the TV and wall is over 30 cm, “Over 30cm”
to Wall	is recommended.
	● If the back space between the TV and wall is within 30 cm, “Up to
	30cm” is recommended.
	Selects multiplex sound mode (if available) (p. 61)
MPX	● Normally : Stereo
	● Stereo signal cannot be received: Mono
	● M1 / M2 : Available while mono signal is transmitted

How to Use Menu Functions

Advanced

25