Technical Information

Channel Allocation (Analogue TV mode)

CH Display / Receive Channel

CH 0 - CH 5		S 2 - S 10	CH 5A		CH 6	- CH	9
CH 9A		CH 10 - CH 12	S 11 - S 44		CH 20	- CH	75
		Rating (Digital TV mode)

Rating		Meaning	Rating		Meaning
-		Not classified	M		Mature
P		Pre school	MA 15+		Mature Adult 15+
C		Children	AV 15+	Adult strong Violence 15+
G		General	R		Restricted 18+
PG	Parental Guidance recommended

Updating the software system (Digital TV mode)

Update system software to ensure that you have latest version software.

If there is an update available, a notification banner is displayed when the channel has the update information. ●To download new software, press “OK” Downloading (approx. 1 hour)

If you choose not to download, press “EXIT”.

To update automatically

Set “Auto Update Search in Standby” to “On” (p. 27)

If there is a new version software being broadcast, the TV will download this automatically.

●The automatic updating sequence is carried out at 3:00 AM and 5:00 AM every morning under the following condition.

Standby (TV turned Off with the remote control) Recording is not in progress.

To update manually

Perform “System Update Search Now” (p. 27)

If there is an update available, a notification banner is displayed.

Note

●During downloading, do not turn Off the TV or touch any buttons. (The TV is automatically activated after downloading is completed.)

●When the TV is switched to standby, there will be a clicking sound after a short delay. Similar clicking sounds will also occur at 3:00 AM and 5:00 AM when “Auto update Search in Standby” (p. 27) is set to “On”. These sounds are normal.

Stereo / Bilingual Sound Selection (Analogue TV mode)

When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the Stereo / Bilingual Sound Selection button.

Audio Signal

STEREO

MAIN I

SUB

MONO

Mode Indicator

NICAM .......Used in New Zealand, Singapore, Hong Kong etc.

Type of broadcast

Regular broadcast

Regular + NICAM MONO I

NICAM STEREO

NICAM DUAL MONO

(Standard Audio)

(MAIN I

)

(MAIN I / SUB

)

Mode Indicator

No Indicator

A2 (German) .......Used in Australia, Malaysia etc.

Type of broadcast

Regular broadcast

BILINGUAL or DUAL MONO:

STEREO

(Standard Audio)

MAIN I / SUB

Mode Indicator

No Indicator

●If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching occurs, it is recommended you switch from STEREO to MONO.

●Even when the contents of the receiving signal undergo changes, selection mode is kept intact.

●When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using the stereo / bilingual sound selection button.

●DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.