Colour System
Sound System
RETURN
All the previous tuning settings are erased.
When the operation is completed, the channel at channel position “1” will be displayed.
If tuning has not been done completely “Manual Tuning”
For Auto Tuning, using the buttons on the side panel of the TV (p. 7)
1 Press repeatedly until “Auto Tuning” appears 2 Access “Auto Tuning”
3 Start “Auto Tuning”To return to TV
Set channel manually Manual Tuning
Fine Tuning
Use to make small adjustments to the tuning of an individual channel (affected by weather conditions, etc.)
Manual Tuning
Set channel manually after Auto Tuning.
Set Sound System and Colour System, and then perform this function. Normally set Colour System “Auto”.
If a VCR is connected only with the RF cable, select channel position “0”.
Manual Tuning
1 BBC1 Fine Tuning
Start Auto Tuning
EXIT
Auto
5.5MHz
Start Auto Tuning Access “Auto Tuning”
Set all channels automatically Auto Tuning
Automatically retune all channels received in the area.
Settings are made automatically
Auto Tuning | Auto Tuning |
|
|
| |
| 1 |
|
|
| |
All tuning data will be erased |
| CH2 | |||
Scan | 1 | 120 | |||
|
EXIT
CH33
|
|
|
|
|
|
Manual Tuning | 1 |
|
| CH33120 | |
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Select the channel position | Select the channel | Search and store |
|
| 1 search |
|
| 2 store |
Sound System
Allows you to change the sound system used for a programme channel.
(4.5MHz / 5.5MHz / 6.0MHz / 6.5MHz)
Select the channel you want to adjust Set this function
Colour System
Lets you select the correct transmission standard for the transmission signal being received
(Auto / PAL / SECAM / M.NTSC / NTSC)
Select the channel you want to adjust Set this function
Normally, select “Auto”.
Tuning Channels
Advanced
27