![](/images/new-backgrounds/1130158/13015881x1.webp)
| Data format for Card browsing |
Photo: | Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF |
| standards |
Data format: | Baseline JPEG |
Max. number of files: | 9,999 |
Image resolution: | 8 x 8 to 5,120 x 3,840 |
| * DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard |
Caution
| A JPEG image modified with a PC cannot be displayed. | |||||
••Partly degraded files might be displayed at a reduced resolution. | ||||||
• |
| Note |
| |||
Folder structure viewed in PC |
| |||||
DCIM | Created automatically | |||||
|
|
| 100_PANA | |||
|
|
| ||||
|
|
|
|
| P1000001.JPG | |
|
|
|
|
| ||
|
|
|
|
| P1000002.JPG | •Usable characters: |
|
|
|
|
| ||
|
|
|
|
| P1000004.JPGP1000003.JPG | |
|
|
|
|
| ||
|
|
|
|
|
•The folder and file names may be different depending on the digital camera used.
•Suitable SD Memory Cards. Please confirm the latest information on the following website. http://panasonic.co.jp/pavc/global/cs (This site is in English only)
DIGITAL AUDIO OUT terminals
You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier to the DIGITAL AUDIO OUT terminals.
Caution
•External speakers cannot be connected directly to PROG.OUT terminals.
•When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSC channel is selected, the output will be PCM.
Control with HDMI “HDAVI Control”
HDMI connections to some Panasonic equipment allow you to enjoy the easy playback or home theater.
•Setup the equipment to enable this function. Read the manual of the equipment.
•Switch the TV unit on again with the equipment on when connection or setup is changed.
•This function may not work normally depending on the equipment condition.
•The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.
•Image or sound may not be available for the first few seconds when the playback starts.
•Image or sound may not be available for the first few seconds when Input mode is switched.
•Volume function will be displayed when adjusting the volume of the equipment.
•Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.
Technical Information FAQs, etc.
41