Panasonic TH-65VX100E Advanced settings, Black, Extension Input level, Gamma, Adjustment

Picture Adjustments

Advanced settings

Enables fine picture adjustment at a professional level.

Notes:

•The adjustment values are memorized separately for each input terminal.

•The adjustment range values should be used as an adjustment reference.

Normalise
Picture Mode	Normal
Contrast	25
Brightness	0
Sharpness	5
White balance	Normal
Colour Management	Off
Advanced settings

Advanced settings
Normalise
Black extension	0
Input level	0
Gamma	2.2
AGC	Off
W/B High R	0
W/B High G	0
W/B High B	0
W/B Low R	0
W/B Low G	0
W/B Low B	0
Cinema reality	Off
Studio Gain	Off
Noise reduction	Off

● Black		Adjusts the dark shades of the image in gradation.
extension
● Input level		Adjustment of parts which are extremely bright and hard to
		see.
● Gamma		Available setting values vary depending on “Picture Mode”
		settings and the type of input signal, as follows.
	Picture Mode	S Curve	1.0	2.0	2.2	2.5	2.6
	Normal	–	*3				*1
	Dynamic		*3			–	*1
	Cinema	–	*3			*2
	Monitor	–	*3			–

*1 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD), Gamma “2.6” can also be selected.

*2 When 60 Hz signals are received, Gamma “2.5” can also be selected.

*3 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD), Gamma “1.0” cannot be selected.

Less More

Less More

Down Up

● AGC Increases the brightness of dark signal automatically.

Off On

●“W/B” adjustment

W/B High R	0	Adjusts the white balance for light red, light
W/B High G	0
		green or light blue areas.	Less	More
W/B High B	0
W/B Low R	0	Adjusts the white balance for dark red,
W/B Low G	0
		dark green or dark blue areas.
W/B Low B	0

Carry out “W/B” adjustment as follows.

1.Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.

2.Adjust the white balance of the dark sections using the “W/B Low R”, “W/B Low G” and “W/B Low B” settings.

3.Repeat steps 1 and 2 to adjust.

Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.

22