AM (MW) Auto Scan/Stop Level Adjustment | Adjustment Location: |
Make this adjustment after “FM Auto Scan/Stop Level Adjustment”. |
|
Setting: | |
[SOURCE] and [MODE] button: MW | Tape Speed Adjustment |
|
AM RF signal
generator
AM dummy antenna (50 Ω) 
Carrier frequency | : 999 kHz |
30% amplitude |
|
modulation by |
|
1 kHz signal | : 33 dB (44.7 ∝V) |
Output level |
30 Ω 15 pF |
65 pF |
set
antenna jack (J1)
TU1
Procedure:
1.Set to the test mode. (See page 14.)
2.Push the [SOURCE] button and set to FM.
3.Push the [MODE] button and set to MW.
INTRO
SHUF1
Display
MW 999
4.Adjust with the volume RV1 on TU1 so that the “MW” indi- cation turns to “MWI” indication on the display window. But, in case of already indicated “MWI”, turn the RV1 so that put out light “I” indication and adjustment.
RV4 FM Stereo Separation Adjustment
| Display | RV2 FM Auto Scan/Stop Level Adjustment |
|
| |
| 999 | RV1 AM (MW) Auto Scan/Stop Level Adjustment |
|
| |
INTRO |
| |
SHUF1 |
|
|
– 16 –