Panasonic TH 50PH11UK Signal menu, SET UP for Input Signals, 3D Y/C Filter For Ntsc AV images

SET UP for Input Signals

SIGNAL menu

Note:

“SIGNAL” setup menu displays a different setting condition for each input signal.

1 Press to display the SET UP menu.

2 Press to select the “SIGNAL”.

SET UP	1/2
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
	RGB
INPUT LABEL	PC
POWER SAVE	OFF
STANDBY SAVE	OFF
POWER MANAGEMENT	OFF
AUTO POWER OFF	OFF
OSD LANGUAGE	ENGLISH (US)

3

4

Press to display the SIGNAL menu.

Press to select the menu to adjust.

Press to adjust the menu.

Press to exit from adjust mode.

For VIDEO (S VIDEO)

SIGNAL	[ VIDEO ]
3D Y/C FILTER (NTSC)	ON
COLOR SYSTEM	AUTO
3 : 2 PULLDOWN	OFF
Panasonic AUTO (4 : 3)	4:3
REFRESH RATE	100 Hz
NOISE REDUCTION	OFF

For COMPONENT

SIGNAL		[ COMPONENT ]
3 : 2 PULLDOWN			OFF
XGA MODE			1024 × 768
REFRESH RATE			100 Hz
NOISE REDUCTION			OFF
H-FREQ.			kHz
	63.98
V-FREQ.	60.02		Hz
SIGNAL FORMAT	1280×1024/60

For RGB

	SIGNAL			[ RGB ]
	SYNC		AUTO
	3 : 2 PULLDOWN		OFF
	XGA MODE		1024 × 768
	REFRESH RATE		100 Hz
	NOISE REDUCTION		OFF
	H-FREQ. 63.98		kHz
	V-FREQ. 60.02		Hz
	SIGNAL FORMAT 1280×1024/60
For Digital
	SIGNAL			[ Digital ]
	3 : 2 PULLDOWN		OFF
	REFRESH RATE		100 Hz
	NOISE REDUCTION		OFF
	H-FREQ.		kHz
		63.98
	V-FREQ.	60.02	Hz
	SIGNAL FORMAT	1280×1024/60

3D Y/C FILTER – For NTSC AV images

Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.)

Press to select the “3D Y/C FILTER (NTSC)”.

Press to set ON / OFF.

3D Y/C FILTER (NTSC) ON

Note:

When ON, this setting only affects NTSC input signals.

35