Panasonic TH 50PH11UK manual Options Adjustments, Options1/3

Options Adjustments

1

2

3

4

5

6

Press to display the Setup menu.

Press to select “OSD Language”.

Press and hold until the Options menu is displayed. Press to select your preferred menu.

Press to adjust the menu.

Press to exit from Options menu.

Options1/3

Weekly Command Timer

Onscreen display		On
Initial INPUT		Off
Initial VOL level	Off	0
Maximum VOL level	Off	0
INPUT lock		Off
Button lock		Off
Remocon User level		Off
Advanced PIP		Off
Options		2/3

Off-timer function	Enable
Initial Power Mode	Normal
ID select	0
Remote ID	Off
Serial ID	Off
Display size	Off
Studio W/B	Off
Studio Gain	Off
Options	3/3
Slot power	Off
Power On Screen Delay	Off
Clock Display	Off
All Aspect	Off
Rotate	Off
Serial Slot Select	Slot1

Item					Adjustments
Weekly Command Timer Sets Weekly Command Timer. (see page 42)
	On:	Displays all the following on screen.
	• Power on display
Onscreen display	• Input signal switch display
	• No signal display
	• Mute and the remaining time of off-timer after was pressed.
	Off:	Hides all the items above from view.
	Off	PC	INPUT1	INPUT2	INPUT3
	Adjusts the input signal when the unit is turned on.
	Notes:
Initial INPUT	• Only the adjusted signal is displayed. (see page 15)
	• Signal can be displayed when the Terminal board is installed.
	• This menu is available only when “INPUT lock” is “Off”.
	• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.
	(Ex. INPUT1A, INPUT1B)

Press button to adjust the volume when the unit is turned on.

	Off	On
	Off:	Sets normal volume.
Initial VOL level	On:	Sets your preferred volume.
	Notes:

•When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.

•You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.

Press			button to adjust the maximum volume.
Off		On
Off:	Sets auto maximum volume.
On:	Sets your preferred maximum volume.
Maximum VOL level Notes:

•If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically becomes the same as the “Maximum VOL level”.

•The volume display can go up to 63 regardless of the settings.

•You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.

39