Panasonic TH 50VX100U manual Reduces power consumption, Power Save Standby Save, Auto Power OFF

Reduces power consumption

1	Display the menu screen.
2	Select “SET UP”.
		PICTURE
		SET UP
		POS. /SIZE
		SOUND

3	Select the item and set.
		SIGNAL
		SCREENSAVER
		COMPONENT/RGB-IN SELECT
			RGB
		EXTERNAL SCALER MODE	OFF
		POWER SAVE	OFF
		STANDBY SAVE	ON
		POWER MANAGEMENT	OFF
		AUTO POWER OFF	OFF
		OSD DESIGN	TYPE1
		OSD POSITION	UPPER LEFT
		OSD LANGUAGE	ENGLISH (US)

2 OK

1 select

2 change 1 select

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

	RGB
EXTERNAL SCALER MODE	OFF
POWER SAVE	OFF
STANDBY SAVE	ON
POWER MANAGEMENT	OFF
AUTO POWER OFF	OFF
OSD DESIGN	TYPE1
OSD POSITION	UPPER LEFT
OSD LANGUAGE	ENGLISH (US)

4	Exit the menu.
	or

●POWER SAVE

●STANDBY SAVE

●POWER MANAGEMENT

●AUTO POWER OFF

When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is reduced.

When this function is turned ON, power consumption of the microcomputer is reduced during power supply standby (see page 13, 15, 16), so standby power of the set is reduced.

When this function is set to ON, it operates under the following conditions to turn the power on or off automatically.

When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC IN signal input:

→Power is turned off (standby); the power indicator lights up orange. When pictures (HD/VD sync signals) are subsequently detected:

→Power is turned on; the power indicator lights up green.

Notes:

•This function operates only during PC IN signal input.

•This function is effective when “SYNC” is set to “AUTO” and “COMPONENT / RGB-IN SELECT” is set to “RGB”.

Equipment power supply is turned OFF when there is no signal.

When this is set to On, the power supply of the unit goes Off 10 minutes after the input signals stop.

Note:

• This function is effective for input signals except PC IN terminal.

37