Panasonic TH-42LRU20, TH-37LRU20 Hotel Mode Setup, Display Hotel Mode, Select Save then press OK

Hotel Mode Setup

Operating restrictions can be set by setting the operating mode or initial settings in the “Hotel Mode”.

Display “Hotel Mode”

Press MENU, G, Y and 0 remote button.

Hotel Mode	1/2	Hotel Mode	2/2	select
Save	On	Button lock	Pattern 1	Adjust
Mode		Power ctrl	On
TA Ctrl	Internal	Remote	Panasonic
Initial input	HDMI 1	CC reset	Off
Initial channel	101-1	Lock reset	Off
Initial volume	10
Max. volume	25
OSD Ctrl	Off

Select “Save” then press OK

Complete Hotel Mode setup

Hotel Mode	1/2	select
Save
Mode	On	ok
TA Ctrl	Internal
Initial input	HDMI 1

18

Hotel Mode menu

Item	Adjustments/Configurations (alternatives)
	Sets operation mode Hotel mode(Guest mode) or Setup mode. (On/Off)
	These settings are enabled even after the AC is switched off and on again.
Mode	On: These menu restrictions are enabled. Communication can be performed with TA (Online), and the
	“Guest menu” is displayed. (Guest mode)
	Off: These menu restrictions are disabled. Communication with TA cannot be performed, and the “Setup
	menu” is displayed. (Setup mode)
TA Ctrl	Sets TA (Terminal Adaptor) status. (Internal/External/Off)
	Internal: Use Internal TA External: Use External TA
Initial input	Selects Input when the TV is turned on.		Does not operate when input from TA* to the TV is prohibited.
	(-/RF/HDMI 1-3/Component/Video1-2/PC)
Initial channel	Sets the channel at power-on.
Initial volume	Sets the volume level at power-on. (0-100)		Does not operate when control from TA to the TV is prohibited.
Max. volume	Sets the maximum volume level. (0-100)
OSD Ctrl	Limits the OSD display. (Off/Pattern1)
	Pattern 1: “Recall” and “Shut-off notification” messages are not displayed at power-on.
	Also displayed when “Pattern 1” is specified as the display command from TA.
Button lock	Limits the TV panel button operation. (Off/All/Pattern1)
	Pattern 1: Only INPUT and POWER buttons are available.
	All: All buttons are not available.
Power ctrl	Sets the screen condition when the AC power is switched on. (Off/On)
	Off: Starts up in last screen.
	ON: Starts up in screen On.
Remote	Switches Operation guide according to remote control. (Panasonic/Others)
CC reset	Sets CC setting status. (Off/On)
	Off: Saves the last settings.	On: Resets all CC settings to defaults.
Lock reset	Sets Lock setting status. (Off/On)
	Off: Saves the last settings.	On: Resets all Lock settings to defaults.

* TA: Terminal Adapter