Panasonic TH-42LRU20, TH-37LRU20, TH-32LRU20 manual Start Accessories/Optional Accessory, Location

Location

Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.

■Adjust the stand to your desired angle.

The stand angle can be rotate 30°/60°/90° to the right/left. (see Control rotation angle)

[Rotation angle: 30°]

b a

[Rotation angle: 60°]

ba

[Rotation angle: 90°]

a

b

Quick Guide

TH-32LRU20 a: 9.8 ” (248 mm)	TH-32LRU20 a: 15.0 ” (381 mm)
b: 7.6 ” (193 mm)	b: 12.8 ” (323 mm)
TH-37LRU20 a: 11.0 ” (279 mm)	TH-37LRU20 a: 17.1	” (433 mm)
b: 8.8 ” (222 mm)	b: 14.7	” (373 mm)
TH-42LRU20 a: 12.5 ” (316 mm)	TH-42LRU20 a: 19.0	” (483 mm)
b: 9.8 ” (248 mm)	b: 16.5	” (418 mm)

■Control rotation angle

The rotation angle can be controlled at 30° or 60°.

It is not necessary to attach the screws for the 90° angle rotation.

Temporarily remove the 5 screws shown below.

Attach A screws (2) to each angle control position.

[Bottom view]	[Front of swivel plate]	[Back of swivel plate]
		[For 30°]
1		2

Swivel plate
	3	5
■Set-up	4	[For 60°]

TH-32LRU20 a: 17.3 ” (439 mm)

b:14.2 ” (360 mm) TH-37LRU20 a: 19.7 ” (500 mm)

b:16.4 ” (416 mm) TH-42LRU20 a: 21.9 ” (555 mm)

b:18.4 ” (467 mm)

Accessories

AScrews (2) XSN3+4FJ M3 × 4

BWood screw (4) THM2AB001

CBit (for pedestal) (1)

Start Accessories/Optional Accessory

[Back of fixed plate]

6.5” (165 mm)

	a
6.1” (155 mm)	b

5.7” (144 mm)

Use the specialized bit Align the swivel hole in the bottom of the

(supplied) in position a , swivel plate with B wood screw that was

and screw in	B wood screwed in previously, and place the TV
screw (2).	set onto the swivel plate.
0.079” – 0.091”	(2 – 2.3 mm)

[View from above]

b

Lastly, use the C specialized bit to fix

BWood screw in place.

Slide the TV set forwards until it stops, then fix it in place.

•

•

Place the TV set in a position where it will not protrude from the table when swiveled.	9
Make sure there is enough space between the TV set and wall, so that when the TV set is swiveled it does not hit the wall.