Panasonic TH-42PR10U, TH-37PR10U manual Options Adjustments

Page 35

Options Adjustments

1

2

3

4

5

6

Press to display the Setup menu.

Press to select “OSD Language”.

Press and hold until the Options menu is displayed.

Press to select your preferred menu.

Press to adjust the menu.

Press to exit from

Options menu.

Options

1/3

Weekly Command Timer

Onscreen display		On
Initial INPUT		Off

Initial VOL level	Off	0

Maximum VOL level	Off	0

INPUT lock		Off

Button lock		Off

Remocon User level		Off

Advanced PIP		Off

Item		Effect							Adjustments
Weekly
Command					Sets Weekly Command Timer. (see page 39)
Command					Sets Weekly Command Timer. (see page 39)
Timer
					On:	Displays all the following on screen.
					• Power on display
Onscreen					• Input signal switch display
display	On		Off		• No signal display
					• Mute and the remaining time of off-timer after was pressed.
					Off:	Hides all the items above from view.
					Off	PC	INPUT1	INPUT2	INPUT3
					Adjusts the input signal when the unit is turned on.
					Notes:
Initial INPUT					• Only the adjusted signal is displayed. (see page 13).
Initial INPUT					• Signal can be displayed when the Terminal board is installed.

					• This menu is available only when “INPUT lock” is “Off”.
					• When a dual input terminal board is attached, A or B is displayed depending on the selected input
					signal. (Ex. INPUT1A, INPUT1B)

35

Image 35

Contents Illustration shown is an image Operating Instructions Manual de instruccionesEnglish Español Model No. Número de modeloRisk of Electric Shock Do not Open Important Safety Instructions Table of Contents Trademark Credits FCC CautionCanadian Notice When using the Plasma Display Safety PrecautionsIf problems occur during use MaintenanceSetup AC Power Supply CordCheck that you have the Accessories and items shown AccessoriesAccessories Supplied AC cord fixing ConnectionsPC Input Terminals connection Signal Names for Mini D-sub 15P ConnectorBasic format for control data CommandSerial Terminals connection Communication parametersConnecting the plug to the Wall Outlet Power on / OFFConnecting the AC cord plug to the Plasma Display INPUT1 INPUT2 INPUT3 PC Selecting the input signalInitial selections Selecting the On-Screen Menu LanguageOn OFF Basic ControlsDigital Zoom see Press to access Channel AdjustmentVolume Adjustment OFF Timer buttonOn-Screen Menu Displays Advanced SettingsPicture Setup Sound On Time / Power OFF Time / Power OFF TimeNormal Full Aspect ControlsNormal Zoom Full Is pressed During Multi PIP OperationsRGB/PC in mode Adjusting POS. /SIZEClock Phase Clock PhaseMulti PIP 1366x768@60Hz RGB, DVI, Hdmi Advanced PIPOne screen Advanced PIP Press to exit from Options menu Sub screen Main screenCinema Picture AdjustmentsStandard DynamicAdvanced Settings Mute Sound AdjustmentSelect the magnification required for the enlarged display Digital ZoomDisplay the operation guide PositionButton Forward Present Time SetupPresent Time Setup Press to set up DAY or Present Time of DAYPower on Time / Power OFF Time SET UP TimerDisplay the SET UP Timer Screen Press to select Negative / Scroll selection Mode selectionStart setting Screensaver For preventing image retentionReduces screen image retention Setup of Screensaver TimePress to exit from Screensaver Side BAR AdjustOFF Dark MID Bright Addition sign Selected Input Reduces power consumptionCustomizing the Input labels Component RGB SET UP for Input SignalsComponent / RGB in Select 3D Y/C Filter For Ntsc AV imagesColor System Color System / Panasonic AutoPulldown / Video NR FREQ. kHz / V-FREQ. Hz Setting RGB sync signalSync Refresh RateOptions Adjustments Off MENU&ENTER On Off Initial VOL Sets normal volume LevelVolume display can go up to 63 regardless of the settings Becomes the same as the Maximum VOL levelNormal Standby EnableInitial Power FunctionRotate Off Does not rotate the image State regardless of the slot power setting InstallationNormalization Weekly Command Timer Press to set each item Press to select a command numberPress to select Time / Command Time Set the time to execute a command programPress to select YES Shipping conditionPlasma Display panel TroubleshootingSymptoms Checks Symptoms CheckRGB PC input signalsCommand list of Weekly Command Timer Specifications Register Your Product Ambler Drive, Mississauga, Ontario L4W 2T3 Panasonic Canada Inc Broadcast & Television Systems DivisionCustomer’s Record