Panasonic TH-42PW4 Basic Controls, Video S VIDEO/COMPONENT, Videos VIDEO/COMPONENT

Basic Controls

R - STANDBY	INPUT	–	VOL	+
G POWER ON
TY-42PW4

Main Power On/Off Switch

Input button

Power Indicator	(VIDEO (S VIDEO)/COMPONENT,
The Power Indicator will light.	RGB/PC Mode Selection)
• Power-OFF ..... Indicator not illuminated (The unit	Push the “INPUT” button to select
will still consume some power as long as the	VIDEO(S VIDEO)/COMPONENT or
power cord is still inserted into the wall outlet.)	RGB/PC input signal modes sequentially.

•Stand-by .... Red

•Power-ON ...... Green

Volume Adjustment Push the Volume Up “+” or Down “–button” to increase or decrease the sound volume level.

Stand-by (ON/OFF) button
The Plasma Display must first be plugged into the wall
outlet and turned on at the power switch (see page 18).					SURROUND button
Push this button to turn the		Plasma Display ON, from
					(see page 27)
STANDBY mode. Push it again to turn the High Definition
Plasma Display OFF to STANDBY mode.						Input button
	Status button					(VIDEO(S VIDEO)/COMPONENT,
						RGB/PC Mode Selection)
Push the “Status” button to display
						Press to select VIDEO(S VIDEO)/
the current system status.
						COMPONENT or RGB/PC input signal
VIDEO		1				modes sequentially. (see page 19)
N O R M A L		2
					INPUT	Sound mute On/Off (see page 26)
				SURROUND		Volume Adjustment
OFF TIMER	90	3				Press the Volume Up “+” or Down
1 VIDEO(S VIDEO)/COMPONENT,				VOL		“–button” to increase or decrease
RGB/PC mode			N		R	the sound volume level.
2 Aspect mode (see page 22)
						R button (see page 21)
3 Off timer
The off timer indicator is displayed						ACTION button
only when the off timer has been set.
						Press to make selections
	N button
(see page 25, 26, 28, 29)						POSITION buttons
			PICTURE	SOUND	SET UP
PICTURE button						SET UP button (see page 20)
	(see page 28)					SOUND button (see page 26)
			PICTURE
PICTURE POS./SIZE button			POS. /SIZE		ASPECT
						ASPECT button
	(see page 24)					Press to adjust the aspect.
						(see page 22)
			PC		OFF TIMER
	PC button
Push the “PC” mode selection
button to select the PC mode.				OFF TIMER button
This button is used to switch
directly to PC mode.			The Plasma Display may be preset to switch to stand-by after a fixed period. The
			setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer
			cancelled) each time the button is pressed.				30	60	90
			When three minutes remain, “Off timer 3” will flash.
			The off timer is cancelled if a power interruption occurs.					0

11