
Technical Information
HDMI connection
HDMI
•HDMI is the world's fi rst complete digital consumer AV interface complying with a
•If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (2).
•When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
•Audio settings can be made on the "HDMI1 input" menu screen. (p. 16)
•Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
(1): The HDMI logo is displayed on an
Note
•HDMI2 terminal is for digital signal only.
•Use with a PC is not assumed.
•The 720p/1080i signals will be reformatted before being displayed on the screen.
•If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
•These HDMI connectors are "type A".
•An equipment having no digital output terminal may be connected to the input terminal of either "Component", "S- VIDEO", or "Video" to receive analogue signals.
•The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p and 1080i. Match the output setting of the digital equipment.
•For details of the applicable HDMI signals, see p. 35.
PC connection
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
•PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency 59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).
•A PC adapter is not necessary for the
Note
Some PC models cannot be connected to this TV. |
|
|
|
| |||||||
•For details of the applicable PC signals, see p. 35. |
|
|
|
| |||||||
•Max. display resolution | Model No. |
|
|
|
| ||||||
• |
|
|
|
| Aspect |
|
| ||||
|
|
|
|
|
|
| |||||
|
|
|
|
|
| 4:3 | 768 × 768 pixels |
|
| ||
| 16:9 | 1,024 × 768 pixels |
|
| |||||||
Signal Name | Pin No. | Signal Name | Pin No. | Signal Name | |||||||
5 | 4 |
| 3 | 2 | Pin No. | ||||||
| 1 | R |
| GND (Ground) |
| NC (not connected) | |||||
10 | 9 | 8 | 7 | 6 |
|
| |||||
G |
| GND (Ground) |
| NC (not connected) | |||||||
15 | 14 |
| 13 | 12 | 11 |
|
| ||||
| B |
| GND (Ground) |
| HD/SYNC | ||||||
|
|
|
|
|
| NC (not connected) |
| NC (not connected) |
| VD | |
|
|
|
|
|
| GND (Ground) |
| GND (Ground) |
| NC (not connected) |
Control with HDMI
HDMI connections to some Panasonic equipments allow you to enjoy the easy playback or home theatre.
•Setup the equipment to enable this function. Read the manual of the equipment.
•This function may not work normally depending on the equipment condition.
•This function may not work normally when Panasonic Player theatre is connected.
•The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.
•Image or sound may not be available for the fi rst few seconds when the playback starts.
•Image or sound may not be available for the fi rst few seconds when Input mode is switched.
•Volume function will be displayed when adjusting the volume of the equipment.
•Easy playback is also available by using the remote control for Amplifi er. Read the manuals of Amplifi er.
34