Panasonic TH-42PX45EH operating instructions Setup, Select the external input, Select PC

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.

You can also listen to PC sound with the audio cable connected. To connect PC (p. 30)

Select the external input

1 TV/AV

TV/AV

OK	Select "PC"
2
	blue (To next page)
	yellow Press twice

•Corresponding(p. 35) signals

•If "H-freq." or "V-freq." is shown in red, the signals may not be supported.

• •Editing

ŶTo return to TV

TV/AV Displays PC screen

and

ŶPC menu setting (changed as desired)

•Making settings "How to Use Menu Functions" to (p. 16)

Menu	Item		Adjustments / Configurations(options)
Picture		W/B High B	White balance of bright blue area			and
	Viewing mode, Contrast, Brightness, Sharpness, Colour balance (p. 16)
menu	Advanced	W/B High R	White balance of bright red area		repeatedly adjusted
		W/B Low R	White balance of dark red area
	setting	Gamma	(2.0 / 2.2 / 2.5 / S Curve)
		W/B Low B	White balance of dark blue area
		Input	Switches to a wide view
			VGA (640 x 480 dots), WVGA (852 x 480 dots),
		resolution	•XGA (1,024 x 768 dots), WXGA (1,366 x 768 dots)
			•Options change depending on signals
		Clock	Set to the minimum level if noise occurs
Setup		H-pos	Adjust horizontal position
	PC
menu	setup		Adjust vertical position
		V-pos
			Eliminate fl icker and distortion	•Set to the minimum level if noise occurs
		Clock phase	•Adjust after Clock adjustment
		Sync	Chooses another synchronous signal if the image is distorted (H&V / On G)
			H&V : by the horizontal and vertical signals from your PC
			•On G: by the green signal from your PC (if available)

Control with HDMI, Volume correction, Side panel, Power save, System language (p. 16)

•Sound menu (p. 16)

Displaying PC Screen on TV Setting Channels (DVB)

Advanced

25