403. TV Features

Sound Projector, continued

Auto Setup

265 Series

Auto setup uses the included calibration microphone to optimize Sound Projector performance for most room conditions.

Initial Preparation

1.

Position and connect the TV as described under

 

“Before You Begin,” page 38.

2.

Power on the TV and external subwoofer, if any.

3.

Plug the microphone cable into the TV’s INPUT 3

 

left audio jack.

Microphone Placement

Make sure there are no large obstacles between the TV and microphone.

Place the microphone

-- On a flat, level surface at least six feet away from the front of the TV.

-- On a tripod or on the backrest of your seating.

-- At the same height yours ears would be when watching TV. The height must be within 3 vertical feet of the height of the TV’s speaker array.

-- Centered in front of the TV, not off to the side.

4. Place the microphone as described in the guide-

lines on this page.

Start Auto Setup

5. Press MENU and go to Sound > AutoSP.

TV

6 ft. minimum

Microphone

Set the microphone on a level surface at ear height at least six feet from the TV. Use a seat backrest or tripod so as to pick up sound from all directions.

Maximum height above speakers

6.

Highlight START and press ENTER.

7.

Quietly exit the room right away. The calibration

 

sequence will start in a few seconds and may be

 

loud. It is important to leave the room as your pres-

 

ence will interfere with the calibration process.

8.

Wait for completion of setup before returning to the room.

9.

Play some sample audio material to check the

 

sound quality.

Note: Do not perform manual adjustments after run- ning Auto setup, as this will erase all settings defined during Auto setup.

10.Store the microphone out of direct sunlight and away from heat.

Height of TV speakers

Be sure the 3 ft. height of the

microphone is within three feet of the speaker height.

Microphone

Center the micro- phone in front of the TV.

DownloadedFor assistanceFrom TV-Manualcall.com1(800)Manuals 332-2119

Page 40
Image 40
Mitsubishi Electronics 164 Series Microphone Placement, Initial Preparation, Start Auto Setup, Height of TV speakers

154 Series, 164 Series, 265 Series specifications

Mitsubishi Electronics has established itself as a leader in the HVAC industry, offering a diverse range of products that cater to various needs. Among its notable offerings are the 265 Series, 164 Series, and 154 Series air conditioning units, each embodying advanced technology and user-friendly features.

The Mitsubishi 265 Series stands out for its energy efficiency and environmentally friendly operation. This series employs advanced inverter technology, which adjusts the compressor speed according to the cooling or heating demand, resulting in substantial energy savings. Additionally, the 265 Series is designed with quiet operation in mind, minimizing noise levels for residential and commercial settings. Its compact design allows for easy installation, and it is compatible with a range of indoor units, making it versatile for different applications.

In contrast, the 164 Series focuses on providing effective climate control in larger spaces. This series is equipped with multi-zone capability, allowing a single outdoor unit to connect with multiple indoor units. This flexibility makes it ideal for commercial buildings or residences with varying temperature needs in different areas. The 164 Series also features advanced filtration systems that improve indoor air quality by capturing dust, allergens, and other particles, ensuring a healthier environment.

The 154 Series, on the other hand, is engineered for simplicity and reliability. It is a more basic model designed for users who seek dependable performance without overwhelming features. The 154 Series offers straightforward controls and is easy to operate, making it suitable for both residential and light commercial applications. Despite its simplicity, it still boasts a commendable SEER rating, ensuring energy efficiency while providing comfortable temperature settings.

Across all three series, Mitsubishi Electronics incorporates a range of smart technologies. With compatibility for Wi-Fi control, users can manage their HVAC systems remotely, adjusting temperatures and settings from their smartphones or tablets. This feature enhances convenience and energy management, particularly in modern smart homes.

In summary, the Mitsubishi 265, 164, and 154 Series air conditioning units each offer unique advantages tailored to different consumer needs. From extreme energy efficiency and advanced filtration in the 265 Series to the multi-zone capabilities of the 164 Series, and the reliability of the 154 Series, Mitsubishi Electronics continues to push the boundaries of HVAC technology, ensuring superior comfort and performance in any environment.