Mitsubishi Electronics 154 Series, 265 Series, 164 Series manual Picture Picture+

4. TV Menus 47

Picture, continued

Contrast • Low contrast shows a variety of shades in darker images

•In most home lighting situations, medium contrast looks best.

•High contrast shows darker images more uniformly black and makes colors appear more vibrant. High contrast is good for brightly lit environments.

Adjusts the white-to-black level Settings are stored indepen- dently for each Picture Mode.

Brightness		Adjusts overall picture brightness. Settings are stored independently for each Picture Mode.
Color
		Adjusts overall color intensity from monochromatic to fully saturated.
Tint
		Adjusts the red-to-green ratio.
Sharpness
		Adjusts picture detail and clarity.
Color Temp		High		Gives white images a cool cast. May provide the most		Adjusts the white balance.
				realistic picture under bright lighting.		Settings are stored indepen-
						dently for each Picture Mode.
		Low		Gives white images a warm cast. Natural/Color
				Temp at the low setting displays video at approxi-
				mately the 6500K industry standard for NTSC
				pictures.
Video		High,		•	High. For poor-quality signals.	Reduces minor noise (graini-
Noise		Medium,		•	Medium. For moderate noise reduction.	ness) in the picture.
		Low, Off		•	Low. For good-quality signals.
				• Off. Leaves the picture unaltered.
EdgeEnhance		On, Off		EdgeEnhance™ adds special edge enhancements to make the image appear
(164, 265 series)				sharper.
DeepField		On, Off		DeepField™ Imager dynamically enhances black levels in portions of the screen to
Imager				provide strong contrast with detail over mixed screen content.
(164, 265 series)
		Demo		For comparison, displays a split picture to show On (right side) and Off (left side).
Backlight		Adjusts peak brightness of the backlight. Applies uniformly to all inputs. Press ENTER to turn the
		backlight on or off.
Picture	Picture+		(Picture Plus)
Screensaver		On, Off			Select On to display a screensaver pattern while playing an audio-only input. To
					use this feature, the input must either
					• Be named as an audio source (e.g., CD, MP3 Player, Bluetooth)
					or
					• Be the antenna input tuned to an audio-only signal.
Film Mode		Auto, Off			480i and 1080i signals only. In Auto, the TV automatically detects and applies
					film-decoding correction to movies filmed at 24 frames per second. Try the Off
					setting if images show many jagged edges. Setting saved by input.

Downloaded From TV-Manual.com Manuals

For assistance call 1(800) 332-2119