Panasonic TH-42PX60X manual Using Timer

Using Timer

The TV can automatically turn On/Off at the designated date and time.

•The Clock must be set before On time/Off time settings. (p. 13)

Operating Peripheral Equipment

You can operate other manufacturers’ components using this TV’s remote control.

-

ŶPress to exit

ŶPress to return

1

2

3

4

Display menu

Select “Timer”

Menu	next
Picture
Audio	select
Timer
Lock
Memory card
Setup
Select the timer to set	select
Timer
Sleep	next
Timer 1

Timer 2	Sleep	Turns Off automatically
Timer 3	Timer 1	Turns On/Off automatically
Timer 4	~	(5 timers can be set.)
Timer 5	Timer 5

Set the timer

ŶTo set “Sleep” (Off Timer)

Press to set unit to shut itself off after a preselected amount of time.

Sleep		•0/30/60/90 (minutes)
Sleep	60	select

ŶTo set “Timer 1-5” (On/Off Timer)

Select the item and set

1	Connect the external equipment to the TV and
	turn Off the external equipment
2	+	Press both buttons simultaneously
		for more than 3 seconds.
		Release the buttons when the equipment selection
		•buttons start flashing.
3		Select the equipment
		with the equipment selection button
		•lit)The.		selected button remains lit (other buttons are not
4		Input the equipment’s 4-digit remote
		control code (p. 37-38)
5		Confirm the equipment with the
		remote control
		•The external equipment turns On.
		ŶIf the equipment does not operate with
		remote control
		•	When your equipment has a single code
				Input the remote control code again
		•	When your equipment has multiple codes
				Change the code with above and test again
				(p. 37-38)

Caution

•Registration will fail if the wrong code is input or it takes more than 30 seconds to register.

To find a code not listed in the code list

This procedure searches all codes and is called the “sequence method.”

Operating Peripheral Equipment Advanced Using Timer

to the previous

screen

Note

•The TV automatically turns Off after 90 minutes when turned On by the Timer. This operation will be cancelled if the Off time is selected or if a key is pressed.

32

Timer 1
CH	310 - 1
Day	EVR FRI
On time	10:00 AM
Off time	11:00 AM
Set	On

select

	set
CH	Select the channel
Day	Select the day

SUN/MON/TUE/WED/THU/FRI/SAT/ MON-FRI/SAT-SUN/DAILY/EVR SUN/

EVR MON/EVR TUE/EVR WED/EVR THU/ EVR FRI/ EVR SAT

On time	The time to turn On
Off time	The time to turn Off
Set	Timer setting (On/Off)

After step above, change the code and test

change

Operate the equipment with the remote control (p. 36)

•Repeat until the code is found

•It may take many attempts before the correct code is found

When the correct code is found

store

33