Technical Information
HDMI connection
HDMI
•HDMI is the world’s first complete digital consumer AV interface complying with a
•If the external device has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
•When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
•Audio settings can be made on the “HDMI1 in” or “HDMI2 in” menu screen. (p. 20) Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz
(*1): The HDMI logo is displayed on an
Caution
•Use with a PC is not assumed.
•All signals are reformatted before being displayed on the screen.
•If the connected device has an aspect adjustment function, set the aspect ratio to “16:9”.
•This HDMI connector is “type A”.
•A device having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S VIDEO”, or “VIDEO” to receive analog signals.
•The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p. Match the output setting of the digital device.
•For details of the applicable HDMI signals, see below.
Input signal that can be displayed
* Mark: Applicable input signal for Component (Y, PB, PR), and HDMI
horizontal | vertical | COMPONENT HDMI | |
frequency (kHz) | frequency (Hz) | ||
|
Maintenance
First, unplug the AC cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft,
•If the surface is particularly dirty, soak a soft,
•Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner; otherwise, the quality of the surface may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
•If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
•Do not allow any detergent to come into direct contact with the surface of the Plasma TV. If water droplets get inside the unit, operating problems may result.
•Avoid contact with volatile substances such as insect sprays, solvents and thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.
Pedestal
•CleaningWipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small amount of neutral detergent has been added, and then wipe with a dry cloth.
Do not use products such as solvents, thinner or household wax for cleaning, as they can damage the surface coating. (If using a
525 (480) / 60i | 15.73 | 59.94 | |
525 (480) /60p | 31.47 | 59.94 | |
750 (720) /60p | 45.00 | 59.94 | |
1,125 (1,080) | /60i | 33.75 | 59.94 |
1,125 (1,080) | /60p | 67.43 | 59.94 |
1,125 (1,080) | /60p | 67.50 | 60.00 |
Note |
| Signals other than those shown above may not be displayed properly. | |
|
| ••The above signals are reformatted for optimal viewing on your display. | |
* | * |
* | * |
* | * |
* | * |
| * |
| * |
•Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow
Technical
Side Bar
Do not display a picture in 4:3 mode for an extended period, as this can cause an
To reduce the risk of such an
•The side bar may flash (alternate black/white) depending on the picture. Using Cinema mode will reduce such flashing (See below).
Side Bar |
4:3
Screen Display
Pic. mode
Maintenance FAQs, etc. Information
| Vivid (default) | : Provides enhanced picture contrast and sharpness for viewing in a |
| •Standard | : Recommended for normal viewing conditions with subdued room lighting. |
42 | •Cinema | : For watching movies in a darkened room. It provides a soft, |
• | 43 |