Technical Information
PC connection
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
•PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency 59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).
•A PC adapter is not necessary for the
Note
•Some PC models cannot be connected to this TV.
•When using PC, set the colour display quality of PC to the highest position.
•For details of the applicable PC signals, see below.
•Max. display resolution
Aspect
4:3
16:9
•D-sub 15-pin connector signal
Pin No. | Signal Name | Pin No. | Signal Name | Pin No. | Signal Name |
| R |
| GND (Ground) |
| NC (not connected) |
| G |
| GND (Ground) |
| NC (not connected) |
| B |
| GND (Ground) |
| HD |
| NC (not connected) |
| NC (not connected) |
| VD |
| GND (Ground) |
| GND (Ground) |
| NC (not connected) |
Input signal that can be displayed
COMPONENT (Y, PB/CB, PR/CR), HDMI ∗ Mark: Applicable input signal
Signal name | COMPONENT | HDMI |
480i (60 Hz) | ∗ | ∗ |
480p (60 Hz) | ∗ | ∗ |
576i (50 Hz) | ∗ | ∗ |
576p (50 Hz) | ∗ | ∗ |
720p (60 Hz) | ∗ | ∗ |
720p (50 Hz) | ∗ | ∗ |
1,080i (60 Hz) | ∗ | ∗ |
1,080i (50 Hz) | ∗ | ∗ |
1,080p (60 Hz) |
| ∗ |
1,080p (50 Hz) |
| ∗ |
1,080p (24 Hz) |
| ∗ |
PC (D-sub 15P)
Signal name
Horizontal frequency (kHz)
Vertical frequency (Hz)
640 × 400 @70 Hz | 31.47 | 70.07 | |
640 × 480 @60 Hz | 31.47 | 59.94 | |
640 × 480 @75 Hz | 37.50 | 75.00 | |
800 × 600 @60 Hz | 37.88 | 60.32 | |
800 × 600 @75 Hz | 46.88 | 75.00 | |
800 × 600 @85 Hz | 53.67 | 85.06 | |
852 × 480 @60 Hz | 31.44 | 59.89 | |
1,024 | × 768 @60 Hz | 48.36 | 60.00 |
1,024 | × 768 @70 Hz | 56.48 | 70.07 |
1,024 | × 768 @75 Hz | 60.02 | 75.03 |
1,024 | × 768 @85 Hz | 68.68 | 85.00 |
1,280 | × 1,024 @60 Hz | 63.98 | 60.02 |
1,366 | × 768 @60 Hz | 48.39 | 60.04 |
Macintosh13” (640 × 480) | 35.00 | 66.67 | |
Macintosh16” (832 × 624) | 49.73 | 74.55 | |
Macintosh21” (1,152 × 870) | 68.68 | 75.06 | |
Note
•Signals other than above may not be displayed properly.
•The above signals are reformatted for optimal viewing on your display.
•Applicable input signal for PC is basically compatible to VESA standard timing.
•PCclarity.signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficient
44