Panasonic PT 56DLX25, PT 56DLX75 manual Insert the new Lamp Unit being careful Insertion direction

Page 67

2Grasp both sides of the Front Cover with your fingertips and pull it from the Projection Display to remove it.

Front Cover

(1)Insert the new Lamp Unit being careful of the

5 insertion direction.

Press on the arrow mark to make sure insertion is done correctly.

(2)Tighten the Lamp Unit Screw with a screwdriver.

(2)

3

(1)

Turn the Lock/Open Knob to the left.

(2)

Pull the Lamp Cover out and down to open

(1)

Notes:

Lamp unit screw

Lamp unit

it.

(1)

Lock/Open Knob

(2)

Lamp Cover

(1)Loosen the Lamp Unit Screw with a

4 screwdriver.

(2)Grasp the Lamp Unit Handle as shown in the diagram, and slowly remove the Lamp Unit from the Projection Display.

Lamp unit handle

(1)

Properly dispose of old lamp. Please see page 66.

Attach the lamp unit and lamp unit housing door securely. If the lamp unit and lamp unit housing door are not attached securely, the protective circuit will be activated and the lamp will not turn on.

6(1) Close the Lamp Cover.

(2)Turn the Lock/Open Knob to the right.

(2)

Lock/Open Knob

(1)

Lamp Cover

7Replace the Front cover.

(2)

Lamp unit screw

Front Cover

CAUTION

Because the lamp unit is hot immediately after its use, touching it may cause burns.

Please allow the lamp to cool before handling or replacing the lamp unit.

After lamp replacement, you must reset the lamp time. Refer to the instructions enclosed with the lamp unit (Part No.: TY-LA2005).

Information

67

Image 67
Contents For assistance, please call Immediately View PTV843-9788 Three Important Reasons to Register Your ProductFor assistance, please call Follow all instructions carefully Keep these instructions for future referenceTrademarks Getting StartedModels Number For assistance, please call 1-888-VIEW PTV843-9788FCC Caution Declaration of ConformityTable of Contents Before Using Observe the following precautions Remote Control Battery InstallationEmergency Alert System EAS Forced Tuning Reset All Memory FunctionsGlossary and Acronyms Number Illuminated Remote ControlLocation of Controls VOL -+ / ŻŹFront View Model PT-56DLX75 unit shown Controls and Terminals on the Projection DisplayVent Output audio signalConnector Audio Out Output audio signal Rear View Model PT-56DLX75 unit shownVHF Antenna InstallationConnecting the Antenna / Cable to the RF in Terminal Antenna ConnectionCable Connection From cable CableCARDTM CableCARD ConnectionInput 3 is located on the front of the unit. P How to connect the 1, 2, 3 Input TerminalsConnects VCRs and other peripheral equipment S-VHS VCR DVD Player How to connect the Component Video Input TerminalsConnecting a DVD Player to Component Video Component Signals Y, PB, PR that can be InputRecording Equipment S-VHS /VHS VCR How to connect the AV OUT TerminalsStereo System Stereo Amplifier and Speakers How to connect the AmplifierAudio Adjustments Analog Audio OutAmplifier with built in Dolby Digital decoders ProcedureFirmly connect the cable to the connector Digital Audio OutNC Not connected How to connect the PC in TerminalsConnecting a PC to PC PC in Terminal D-SUB 15P Pin LayoutsKHz Personal Computer Signals RGB signals that can be inputWhen audio signal input is analog How to connect the Hdmi input terminalConnection diagram When audio signal input is digitalAudio signal PCM ProcedureCompatible formats Power OFF Power on / OFFTurning the Power on and OFF Power onAuto program First Time SetupFor your convenience, First Time Set up menu will LanguageBasic Menu Navigation Example of a procedureButton operation during Menu display Menu navigation Basic Operation Other Adjust sub-menuPress Menu to display the Main Menu screen Tuning channelsSwitching languages for display Press to select Setup icon Press to display the Setup menuChannel menu Automatic program settingPress to select Program ChannelPress to display the Setup Manual program setting„ Edit Caption When a preset Caption has been entered When selecting a desired Caption manually„ Preview CH „ Edit Add„ Edit Favorite Projection Display operation Selecting Input ModeRapid Tuning „ Card input mode Photo Viewer is selectedChannel and Program Tuning Using the CH/VOL ButtonUnit Status display Audio Mute Favorite FeatureUse Favorite Feature Set Favorite FeatureAnalog mode Select Audio Mode for TV ViewingSleep Timer Feature Digital modeAspect Controls Changing the aspect modeAspect mode is changed each time when Aspect is pressed Mode Picture ExplanationChanging the channel „ Caution when HDMI/PC is inputSplit screen Splitting the screenPress to swap Select desired input mode Right screenTV/VIDEO Press to select the desired input Mode Swapping left and right screensPress to select Picture Picture AdjustmentsPicture Menu is inaccessible when no signal is present Press to adjust each itemPress to display the PC Adjust Menu Picture ModePC Adjust Press to select picture modePress to display the Advanced Adjust menu Other AdjustAdvanced Adjust Adjust menuPress to select Audio Audio AdjustmentsAudio Mode Normal / Bass / Treble / BalanceOther detailed audio adjustments can be made Press to select BBE settingCH Press to select BBE Sleep time may be set using the Sleep button. P Sleep Timer FeatureSet Sleep Timer Press to display Timer menu„ Enter Secret Code Lock Feature„ Create Secret Code First Time Setting Enter Secret CodeChannel Lock Block channel selection Rating level settingLock Set Block programAge Blocked Description Based Content Group Ratings Monitor out settingPress to select Monitor out Press to select On or Off Enter a 4-digit password Change passwordBlocking Messages Remove the Card Photo ViewerInsert/Remove the Card Insert the CardSD button may also be pressed for Photo Viewer mode. P Jpeg thumbnailCard icon Press to display the Photo ViewerPress SD to exit Photo Viewer Card Warning MessagesExit Photo Viewer Index Area OperationSingle Play Mode Press to select each item Press to set each item Slide Show ModeExit Slide Show mode Press during Single Play ModePress to display signal meter Setup FeaturesSignal meter Press to select Signal meterCC Closed Caption CC ModeCC Mode for Analog Input labelsSettings CC Mode for DigitalDigital settings CC ResetReset Other adjust SetupAbout Programming Without a Code Programming the RemoteBrand Code VCR Infrared Codes IndexOK to store the code Component CodesCable Converter BOX DVD, CD Players Infrared Codes Index Remote Control Quick Reference GuideCodes For CD Player AMPLIFIERS, and DBS Infrared Codes IndexOperating a DBS Operating Components with Remote ControlOperating a VCR Operating a Cable BOXOperating a Receiver Program the Remote Control to use with DVDProgram the Remote Control to operate audio receiver Operating a DVDOperating a PVR Personal Video Recorder Program the Remote Control to use with a PVRIndicator Indicator Symptom Problem Possible SolutionReplacing the lamp unit Lamp replacement procedureLamp unit replacement period Power button Lamp indicator Power indicatorClose the Lamp Cover Turn the Lock/Open Knob to the right Insert the new Lamp Unit being careful Insertion directionReplace the Front cover OFF TroubleshootingPT-56DLX75 PT-61DLX75 PT-56DLX25 SpecificationsCustomer Services Directory CleaningLimited Warranty Limits And Exclusions Limited WarrantyLimited Warranty Coverage Carry-in or In-Home ServicePreamble Other InformationAbove provided that you also do one of the following END of Terms and Conditions How to Apply These Terms to Your New ProgramsVersion 2.1, February Other Information Information USA How to Apply These Terms to Your New LibrariesCableCARD IndexModel Number Serial Number Customer’ Record

PT 56DLX25, PT 56DLX75 specifications

The Panasonic PT-56DLX75 and PT-56DLX25 are two notable models from Panasonic's lineup of projection televisions that marked an era of high-quality home entertainment. These models are characterized by their advanced technologies, impressive display features, and user-friendly interfaces that cater to a wide range of viewing preferences.

Both models feature a 56-inch screen, making them perfect for home theater setups. The display utilizes a high-quality CRT (Cathode Ray Tube) technology, which was a favored choice during their time for delivering deep blacks, rich colors, and excellent contrast ratios. The PT-56DLX75, being the higher-end model, incorporates advanced circuitry that enhances image quality and ensures that viewers experience movies and shows with incredible clarity and vivid detail.

One of the standout features of the PT-56DLX75 is its "Digital Comb Filter", which significantly reduces picture noise. This ensures that the image remains sharp even when displaying complex scenes. The PT-56DLX25, while slightly toned down in certain aspects, still boasts a reliable comb filter, giving it the capability to deliver quality images for everyday viewing.

Another important technology present in both models is the "Real Motion" processing, which minimizes motion blur, making fast-paced sequences in sports and action movies look smoother. This is particularly beneficial for dynamic viewing, as it allows for greater immersion in fast-paced content.

The sound systems in both models are designed to complement their visual prowess. Equipped with built-in speakers that provide a satisfactory audio experience, these televisions can fill a room with sound. Users looking for a more cinematic experience can connect external audio systems through multiple audio input options.

Connectivity options on the PT-56DLX75 and PT-56DLX25 are diverse, enabling users to connect various devices like VCRs, DVD players, and gaming consoles easily. Furthermore, the intuitive on-screen menu system ensures that users can navigate settings without hassle.

In conclusion, the Panasonic PT-56DLX75 and PT-56DLX25 remain testaments to the technological innovations of their time, offering solid performance and features that cater to diverse viewing needs. Even as newer technologies emerge, these models consistently provide an enjoyable viewing experience, combining quality display with sound performance in a stylish package.