Panasonic PT 45LC12 Cleaning the Air Filter, Air Filter should be cleaned about every 400 hours

Page 58

Cleaning the Air Filter

The Air Filter should be cleaned about every 400 hours.

1When the accumulated operating time reaches 400 hours, the screen on the right will be displayed for 5 minutes. When this happens, please follow the instructions and clean the air filter. This is very important!

2Turn the POWER button to OFF.

Wait until the cooling fan stops and the POWER indicator turns solid red.

3Remove the right Speaker cover.

Place your fingertips under the Speaker cover and pull it from the Projection display.

4Clean the Filter.

Gently remove any accumulated dust from Air Filter unit with your vacuum cleaner.

CAUTION:	Please be very careful not to
	damage or rip the filter material.
	Operating Projection display with
	torn or damaged Filter may
	cause damage to Projection
	display.

5Replace the Speaker cover.

•Operating this unit without the air filter installed will result in dust or dirt being drawn into the LCD projection display assembly. Visibly, the picture will be degraded.

If the dust cannot be removed by cleaning, it is time to replace the air filter.

6This screen appears when Projection display is turned on. If cleaning is done, select YES.

Press to select

NO or YES.

	Press to set.

CAUTION:	Please do not operate without the air
	filter. Serious damage will occur.

WAARCUTIINSLIIRGDMSLEIRHATLETRENFFT.MOCIIOCANLSUFLMGXTTPLFIMREOEI.MWOREASTNKHTRICDSZNETHEERLMT.DUEAEOARPCVIANROEOTVINDETFGUHRTIHCELTISER

REIABILY.

Cleaner

DFITIDLTIYSEORUV?ECRYLENEAOSIMN.POTHRETAANTIR.

SELECT

58

For assistance, please call : 1-888-VIEW PTV(843-9788)

Image 58

Contents For assistance, please call Models No. PT-40LC12/PT-45LC12For assistance, please call 1-888-VIEW PTV843-9788 USAImportant Safety Instructions Important Safety Instructions For Projection displayImportant Safety Instructions Declaration of Conformity TrademarksOr send e-mail to consumerproducts@panasonic.com Model NumberTable of Contents Receiver Location Before UsingSafety Precaution Optional External EquipmentBefore Using AccessoriesRemote Control Battery Installation Precaution on battery useIlluminated Remote Control Location of ControlsLocation of Controls Controls and Terminals on the projection display FrontRear Connecting the Antenna / Cable to the RF in Terminal No VCR InstallationAntenna Connection Installation Cable ConnectionOutput Connects VCRs and other peripheral equipment VideoOUTPRDVDY/PPBB/PROUTY How to connect the AV Out Terminals VideoPin No Signal name Ground How to connect the PC Input TerminalsSignal Names for D-SUB 15P Connector HD/CSYNCAnalog RGB signals that can be input Power on and OFF Initial SetupPower on Turning the Power on and OFFPower on / OFF Power OFFUse the Action button Flow Chart of Main menuTo set or go to next menu Itcode Flow Chart of Main menuReturning to the previous screen Nenacable Tuning channelsEnglish Manual SETNochfound Tuning channelsPress to exit menu Manual channel setting Channel Press to selectPress to select channel To add channelTo delete channel Press to add channels to memory Press to select channelDesired Channel. or use Number keysProjection display operation Using the number keysInvalid operation notice feature TV status displayAspect Controls During PC input, the mode switches between no MAL, TrueFull only Aspect Controls When a channel button is pressed during channel search Searching for the desired channel Channel searchPlaying peripheral equipment Turning the power on and switching input modesConfirming connections Sound mute MuteMute / Freeze / SAP Freezing picturesSAP broadcast MTS Stereo and SAP broadcastMTS Stereo broadcast Mono broadcastPress to Selecting the screen mode for split screenSplit screen Select ModesChanging the channel of the right screen Split screenSwapping left and right screens Picture in Picture PIP Screen Display PIP screenSelecting the screen size for PIP screen Picture in Picture PIP ScreenChanging the channel of the PIP screen Swapping Main and PIP screensPress to select the screen mode Adjusting screen position and sizeFull mode Press to exit menu Width Adjusting screen position and sizePhase SizeAuto Audio AdjustmentsSpeech Treble Audio AdjustmentsBass BalancePicture Adjustments CinemaPicture Adjustments Or Or Lock FeatureChanging your secret code Deactivated Lock FeaturePerform Enter Secret Code on Press to set Press to selectView NR Not Rated Programs Perform US Movies Ratings onYES or no Ratings to be blocked. P Press to setEnter Caption Closed CaptionsScreen Press to select Caption screen Closed CaptionsPress repeatedly to select Cable AdjustCVA Pidp a ManualOFF Screen turns solid blue when signal is absent or weak Weak Signal Display FeatureSET UP Press to display Channel screen On or OFFRGB VGA Video NR Noise Reduction FeatureVideo Press to display Video screenAutomatically changing screen size MovgafComponent Video Input Y, PB / Cb ,PR / Cr input terminals RGB Input Feature VGA or 480P VGA When RGB input signal is VGA 60Hz from PCPress to select Language Switching languages for displayInformation Information screenAir Filter should be cleaned about every 400 hours Cleaning the Air FilterCleaner Air Filter Replacement Cleaning the Air FilterClogged Air Filter Detection Replacing the lamp unit Lamp unit replacement periodImportant Points to keep in mind When code is known When code is not known Infrared Remote Codes for Specific ComponentsMaker Set Up No VCR Infrared Codes IndexCBL AUX Mode Function Quick Reference Functional Button ChartButton Button Mode Function Symptoms Checks Troubleshooting12-14 Specifications Cleaning Customer Services DirectoryCategory Parts Labor Service Limited WarrantyLimited Warranty Coverage Carry-in or In-Home ServiceIndex SymbolsPower button/POWER indicator 10, 21 Channel up / down buttons projection display