Serial OUT | Panasonic PT-D10000 specs

S P E C F I L E

3-Chip DLP™ Projector

PT-D10000

VIDEO OUT:

S-VIDEO IN:

LAN:

SERIAL IN *4:

SERIAL OUT *4:

REMOTE 1 IN:

REMOTE 1 OUT:

REMOTE 2 IN:

Optional board slot *5:

With ET-MD77SD1 installed: SERIAL IN:

SERIAL OUT:

With ET-MD77SD3 installed: SERIAL IN:

SERIAL OUT:

With ET-MD77DV installed: DVI-D IN:

Power cord:

Cabinet material:

Dimensions (W x H x D):

Weight*6:

Operating temperature*7:

Operating humidity:

BNC x 1, 1.0 Vp-p, active through

Mini DIN 4-pin x 1

Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms (S1 signal compatible)

RJ-45 x 1, 10Base-T/100Base-TX, compatible with PJLink™ (class 1) D-sub 9-pin (female) x 2, for external control (RS-232C/RS-422 compli- ant)

D-sub 9-pin (male) x 1, for link control (RS-422 compliant)

M3 jack x 1 for wired remote control

M3 jack x 1 for link control

D-sub 9-pin x 1 for external control (parallel)

BNC x 1, SD-SDI signal (4:2:2), SMPTE 259M compliant, 480i, 576i BNC x 1, active through

BNC x 1

SD-SDI signal (4:2:2): SMPTE 259M compliant, 480i, 576i

Single-link HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE 292M compiant, 720/50p, 720/60p, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p

BNC x 1, active through

DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, single link EDID1: 480p, 576p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF,

1080/25p, 1080/30p, 1080/60p, 1080/50p, 720/60p, 720/50p EDID2: Compatible with non-interlaced signals only, Effective resolution: VGA (640 x 480) – U-XGA (1,600 x 1,200) Dot clock: 25–162 MHz

NOTE: LAN terminals on the optional board can not be used. Use the LAN terminal

on the projector.

3m/9.8´ Moulded plastic

578x 320 x 643 mm (22-3/4˝ x 12-19/32˝ x 25-5/16˝) (without lens) Approx. 32 kg (70.5 lbs) (without lens)

0°–45°C (32°–113°F) 10%–80% (no condensation)

As of November 2008

< 3 >