Panasonic TX-47P500H, TX-47P500X Connections, Connecting the Aerial Cable to the RF In Terminal

Connections

Connecting the Aerial Cable to the RF In Terminal

VHF Aerial UHF Aerial

Mixer

75 Ohm

Coaxial Cable

RF In Terminal

Coaxial Aerial Plug

Coaxial aerial plug

RF in

Terminal

75 Ohm Coaxial Cable

Notes:

•To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminat- ing plug are required.

•If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial socket and your set.

•Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for your particular area and accessories required.

•Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the Customer.

Connecting Headphones

Connect headphones as follows.

AV3

IN

Main	Sub.	S-VIDEO VIDEO L/MONO R
		AUDIO

(3.5mm Plug)

(Optional)

(not supplied)

You can listen to sound from each of the headphones plugs as shown below.

Screen condition				Speaker	Main	Sub	Monitor
				Sound	Headphones	Headphones	Output
Single picture/		A		A	A	A	A
Teletext				(Stereo)	(Stereo)	(Mono)	(Stereo)
				A	A	B	A
Picture in Picture	A
				(Stereo)	(Stereo)	(Mono)	(Stereo)
			B
				A	A	B	A
Picture and Picture	A		B
				(Stereo)	(Stereo)	(Mono)	(Stereo)

Main Headphones plug:

When a Main Headphones plug is inserted into the Headphones socket, all speakers will be automatically discon- nected; only the Main Headphones will function.

Use Volume Up “+” or Down “-” button to control volume level.

Sub Headphones plug:

For the sub Headphones volume control, refer to page 30.

9