Panasonic DMR-EX75, DMR-EX85 manual Class Laser Product

Page 2

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,

DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,

DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

USE ONLY THE RECOMMENDED ACCESSORIES.

DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO

USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,

BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS

WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.

DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS

LIGHTED CANDLES, ON THE UNIT.

DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY

FRIENDLY MANNER.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

The socket outlet shall be installed near the equipment and easily accessible.

The mains plug of the power supply cord shall remain readily operable.

To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.

CLASS 1

LASER PRODUCT

RQT8388

 

 

 

 

 

 

 

 

 

 

(Inside of product)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Image 2
Contents Illustration shows DMR-EX75 Model No. DMR-EX75RQT8388-L ExampleClass Laser Product Table of contents DVD Video Recording format HDD, disc and card informationHDD and discs you can use for recording and play DVD-Video formatRecording modes and approximate recording times +R/+RW Video Recording formatHDD, disc and card information +R DLHDD, disc and card information Play-only discs 12 cm/8 cmDiscs that cannot be played Structure of folders displayed by this unit Cards you can use on this unitSuitable SD Memory Cards TypeImportant notes for recording Important notes for recording/HDD Hard HDD Hard disk drive handling careDisk drive handling care Disc and card handling Unit careRemote control information Included accessoriesRemote control information Disc and card handling/Unit care/Included accessories/TheRemote control Control reference guideControl reference guide Main unitUnit’s display Opening the front panelMake sure to use the pair of supplied RF coaxial cables Connecting a televisionWhen the unit is not to be used for a long time Connecting a Digital television and VCR Connecting a television and VCRConnecting an Analogue television and VCR ConnectionOther connections Connecting an amplifier with a digital input TerminalConnecting a stereo amplifier ConnectionControl with Hdmi Hdavi Control TM Power on linkPower off link Easy playbackPress 3, 4 to select the TV aspect and press Enter When clock setting screen is displayedPress 3, 4 to select your area and press Enter DVDTo enjoy progressive video Press 3, 4 to select Connection and pressPress 3, 4 to select Progressive and press Enter Press FunctionsTelevision operation Set up to match your television and remote controlWhen the following indicator appears on the unit’s display Test by turning on the television and changing channelsDigital channel information Watching televisionSelect the channel Press to show the screen informationPress ¥ REC to start recording Recording television programmesPress Drive Select to select the HDD or DVD drive To open the tray without disc finalization Disc Insertion/EjectionTo finalize the disc Recording television programmes Recording settings for High Speed CopyTo specify a time to stop recording- One Touch Recording Press ¥ REC on the main unit to select the recording timePlaying while you are recording Flexible RecordingPress 3, 4, 2, 1 to select Start and press Enter Press 1 Play during recordingPress G-Code Timer recordingUsing G-CODEsystem to make timer recordings Press the numbered buttons to enter the G-CODEnumberPress PROG/CHECK Manually programming timer recordingsTimer recording Press Drive Select to select the recording drive and press To cancel recording when recording has already begunTimer recording Press 2, 1 to select Stop Recording and press EnterAuto Renewal Recording Check, change or delete a programmeRelief Recording Playing recorded video contents/Playing play-only discs Operations during play Changing audio during play Press AudioOnlydiscs/Playing Playing DivX discs, MP3 discs and still pictures JPEG/TIFFDivX discs, MP3 discs and still pictures JPEG/TIFF MP3Press 3, 4 to select the title and press Enter Playing DivX discsPress Direct Navigator Selecting file type to playStill pictures Playing MP3 discsPress 3, 4 to select the track and press Enter Playing DivX discs, MP3 discsPress 3, 4, 2, 1 to select the album and press Enter Playing still picturesPress Drive Select to select the HDD, DVD or SD drive Go to stepStart Slide Show Slide Show SettingUseful functions during still picture play RotatePress Display Using on-screen menus/Status messageUsing on-screen menus Status messages PressPress 3, 4, 2, 1 to select the chapter Editing titles/chaptersEditing titles/chapters and playing chapters If you select Chapter ViewTitle operations Set up Protection §Cancel Protection § Partial DeletePress 2, 1 to select the source title and press Creating, editing and playing playlistsCreating playlists Press ReturnAdd Editing and playing playlists/chaptersPlaylist operations Chapter MovePress 3, 4 to select the operation and press Enter Editing still picturesPress the Green button to select Picture Press 2, 1 to select number of print 0 to 9 Album and picture operationPress 2, 1 to select Delete and press Enter Press Delete Delete NavigatorDeleting titles or pictures during play Available disc space after deletingDelete Navigator/Copying titles or playlists Copying titles or playlistsApproximate copying times Max. speed Copy Press 3, 4 to select Copy and press EnterPress 2, 1 to select Start and press Enter Copying using the copying list- Advanced Copy Recording and playing while copying To stop copyingTo return to the previous screen To edit the copying listCopying MPEG2 moving pictures from an SD card Setting the unit to copy according to the set timeSet Copy Time MPEG2VIDEO§ HDD DVD-RAMRegister still pictures for copy Copying using the copying listCopying still pictures To register individual still picturesPictures and press Enter Copying all the still pictures on a card- Copy All PicturesPress 3, 4 to select To Others Press 3, 4 to select Copy AllDV automatic recording DV Auto Rec Copying from a video cassette recorderPress ¥ REC Manual recordingHDD, disc and card management Common proceduresSetting the protection Providing a name for a discDeleting all the contents of a disc or card-Format Deleting all titles and playlists-Delete all titlesCreating Top Menu-Create Top Menu Selecting the background style-Top MenuEnabling discs to be played on other equipment-Finalize HDD, disc and card managementPress 3, 4, 2, 1 to select a character and press Enter Entering textShow Enter Name screen Press SetPress 3, 4 to select an item and press Enter Functions windowChild Lock Entering text/FUNCTIONS window/Child LockPress 3, 4 to select the tab and press Changing the unit’s settingsSummary of settings OPEN/CLOSEPicture Unit’s settingsChanging Changing the unit’s settings DTSChanging the unit’s settings Tabs Menus Options Underlined items are the factory presetsSoftware Update in Standby Clock Power SaveSystem Update Software Update Search NowPress 3, 4 to select Signal Condition and press Enter TuningServices and press Enter Press 3, 4 to select Add New DVBPress 3, 4, 2 Press 3, 4 to select Auto-Setup Restart and press EnterPress 3, 4 to select Manual and press Enter To select aClock Setting TV SystemMessages On the televisionOn the unit’s display MessagesCover Frequently asked questionsSet up Troubleshooting guide Frequently asked questions/Troubleshooting guideTroubleshooting guide Troubleshooting guide Copying, deleting and setting PasswordYou want to cancel the ratings Play Play fails to start even whenTo reset the ratings level To reset this unit To return all the settings otherPreset SettingsGlossary RGB Specifications HdmiSafety precautions Index Web Site http//panasonic.net RQT8388-L