Panasonic DMR-E65 manual Television operation, Point the remote control at the television

Page 11

Television operation

You can configure the remote control TV operation buttons to turn the television on/off, change the television input mode, select the television channel and change the television volume.

Point the remote control at the television

While pressing [Í TV], enter the code with the numbered buttons.

e.g., 01:	[0] ➡ [1]
Manufacturer and Code No.

	Brand	Code
Panasonic/National		01, 02, 03, 04
GOLDSTAR/LG		15, 16
HITACHI		08

JVC		07
MITSUBISHI		09, 10

NEC		13
PHILIPS		12
SAMSUNG		12, 17, 18
SANYO		14, 19

SHARP		11
SONY		05

TOSHIBA		06

Test by turning on the television and changing channels. Repeat the procedure until you find the code that allows correct operation. ≥If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote

control is not compatible with your television.

When other Panasonic products respond to this remote control

If other Panasonic products are placed close together, change the remote control code on the main unit and the remote control (the two must match).

Under normal circumstances use the factory set code “DVD 1”.

1 While stopped

Press [FUNCTIONS].

2 Press [3, 4, 2, 1] to select “SETUP” and press [ENTER].

3 Press [3, 4] to select “Others” and press [1].

4 Press [3, 4] to select “Remote

Control” and press [ENTER].

5 Press [3, 4] to select the code (“DVD 1”, “DVD 2” or “DVD 3”) and press [ENTER].

SETUP	Remote Control

	Press “±” and “ENTER” together
Tuning	for more than 2 seconds on the remote
Others	control.

Disc

6 To change the code on the remote control

While pressing [ENTER], press and hold the numbered button ([1], [2] or [3]) for more than 2 seconds.

7 Press [ENTER].

∫When the following indicator appears on the unit’s display

The unit’s remote control code

Change the code on the remote control to match the main unit’s (➡step 6).

[Note]

Executing “Shipping Condition” in the SETUP menu returns the main unit code to “DVD 1”. Change the remote control code to 1 (➡step 6).

Getting started

RQT7450

11

Image 11

Contents Example Model No. DMR-E65RQT7450-L This Unit is Intended for USE in Moderate Climates Getting startedAccessories Table of contentsRemote control Useful featuresUnit’s display Remote controlControl reference guide Main unitBefore moving the unit, ensure the disc tray is empty When the unit is not to be used for a long timeDo not connect the unit through a video cassette recorder Component video output Connecting to a television with 21-pin Scart TerminalConnecting to a VCR with 21-pin Scart terminal StartedConnection to a stereo amplifier Connecting an amplifier or system componentConnection To enjoy multi-channel surround sound on DVD-VideoAuto-Setup Press Functions Press 3, 4, 2, 1 to select Setup and press EnterTo enjoy progressive video Selecting television type and aspectTelevision operation When the following indicator appears on the unit’s displayPoint the remote control at the television To change the code on the remote controlDiscs that cannot be played Disc and card informationDiscs you can use for recording and play 12 cm/8 cm Play-only discs 12 cm/8 cmStructure of folders displayed by this unit Accessory discsCards useable on this unit Types of disc for the type of connectedPress ¥ REC to start recording Recording television programmesPress DVD to select the DVD drive Press W X CH to select the channelPlaying while you are recording Recording modes and approximate recording timesRefer to the control reference on Flexible RecordingPress 3, 4, 2, 1 to select Start and press Enter Press G-Code Timer recordingPress F Timer Using G-CODEsystem to make timer recordingsManually programming timer recordings To change a programme To exit the timer recording listTo put the unit on timer recording standby Check, change or delete a programmePlaying recorded video contents/Playing play-only discs Manual Skip Operations during playSkipping the specified Time Time SlipChanging audio Editing operations during playErase Create chapterPress TOP Menu Using menus to play MP3Using the tree screen to find a group Press 3, 4, 2, 1 to select a groupInserting/Removing the SD/PC card Playing still picturesSD card slot PC card slotRotate Press DVD or SD/PC to select the drivePress Direct Navigator Useful functions during still picture playPress Display Using on-screen menus and Status messagesDisc menu-Setting the disc content On-screen menusPicture menu-Change the picture quality Status messagesPress Status Play menu-Change the play sequenceEditing Editing titles/chaptersEditing titles/chapters and playing chapters Press 3, 4, 2, 1 to select the chapterEnter Name Set up Protection§Cancel Protection§ Press 2, 1 to select Yes and press Enter PropertiesPress Return Creating, editing and playing play listsCreating play lists Press 3, 4, 2, 1 to select Play List and press EnterPlay list operations Editing and playing play lists/chaptersPress 2, 1 to select number of print 0 to Set up Protection §Editing still pictures Picture and folder operationManual recording Recording from a video cassette recorderStart play on the other equipment Press ¥ RECTransferring dubbing still pictures Transferring dubbing using the transferring dubbing listTo exit the Functions window Functions windowPress Functions Press 3, 4, 2, 1 to select an item and press EnterPress 3, 4 to select Disc Protection and press Enter Setting the protectionDisc and card management Press Functions Press 3, 4, 2, 1 to select DiscEnabling DVD-R to be played on other equipment-Finalize Erasing all the contents of a disc or card-FormatCharacter and press Enter Entering textShow Enter Name screen Press 3, 4, 2, 1 to select aFunctions Changing the unit’s settingsSummary of settings Common proceduresPicture Changing the unit’s settingsTabs Menus Options Underlined items are the factory presets Mpeg ConvenientConnection TV Aspect DTSManual TuningPress 3, 4 to select Manual and press Enter TV System Clock settingsDisc and card handling Maintenance/Disc and card handlingChild Lock Unit careSafety precautions SpecificationsGlossary Recording Frequently asked questionsSet upPage CoverOn the unit’s display Error messagesOn the television Troubleshooting guide Troubleshooting guide Play starts but then stops Ratings passwordPlay Play fails to start even when Play is pressedIndex