Panasonic CT-2733H, CT-3233H Testing the Settings in the Clone Box, Testing the Clone Box Battery

Page 14

•The red LED will flash while the data is uploaded into the box. The green LED will light for about two (2) seconds when the procedure is complete.

•If the green LED does not light for about two

(2)seconds, retry by holding the ALT button while pressing the LEARN button.

7.Disconnect the clone box from the television and turn it OFF.

8.Reset the volume on the television.

9.Refer to the section entitled Downloading Settings into Other Televisions (TEACH).

Testing the Settings in the Clone Box

This test compares the clone box settings with the television settings. The television must be in HOTEL mode.

1.Press the POWER ON button on the clone box.

•The LEDs will flash red and green to confirm power is ON.

2.Connect the clone box to the Digital Interface port on the back of the television.

•The television must be plugged into an AC outlet but can be either OFF or ON.

3.Press the TEST button.

•The LEDs will flash red and green while the data is compared. The green LED will light for about two (2) seconds if the settings in the box match the television.

4.Disconnect the clone box from the television and turn it OFF.

Testing the Clone Box Battery

1.Press the POWER ON button on the clone box.

•The LEDs will flash red and green to confirm power is ON.

2.Hold the ALT button while pressing the TEST button.

•The LEDs will alternately flash red and green while the box is tested.

Note: Replace the 9 volt battery if the LEDs do not flash red and green.

•The green LED will light for about two (2) seconds, if battery is charged.

Note: If the green LED does not light for about two (2) seconds at the end of the test, new data must be downloaded into the box.

•La diode rouge clignote pendant le chargement des données. La diode verte s’allume pendant environ deux (2) secondes une fois le chargement terminé.

•Dans le cas où la diode verte ne s’allumerait pas pendant deux (2) secondes, réessayer en appuyant sur la touche LEARN tout en maintenant la touche ALT enfoncée.

7.Débrancher la boîte de clonage du téléviseur, puis la mettre hors marche.

8.Refaire le réglage du volume sur le téléviseur.

9.Se reporter à la section Téléchargement des paramètres sur d’autres téléviseurs (TEACH).

Vérification des paramètres dans la boîte de clonage

Ce test compare les paramètres mémorisés dans la boîte de clonage avec ceux du téléviseur. Le téléviseur doit être dans le mode HÔTEL.

1.Appuyer sur la touche POWER ON de la boîte de clonage.

•Les diodes clignotent (vert et rouge) pour confirmer la mise en marche.

2.Brancher la boîte de clonage dans le port d’interface numérique sur le panneau arrière du téléviseur.

•Le téléviseur doit être sous tension (cordon branché) mais peut être en ou hors marche.

3.Appuyer sur la touche TEST.

•Les diodes rouge et verte clignotent pendant la comparaison des données. La diode verte reste allumée pendant deux (2) secondes si les paramètres de la boîte et du téléviseur concordent.

4.Débrancher la boîte de clonage du téléviseur, puis la mettre hors marche.

Vérification de la pile de la boîte de clonage

1.Appuyer sur la touche POWER ON de la boîte de clonage.

•Les diodes clignotent (vert et rouge) pour confirmer la mise en marche.

2.Tout en maintenant la touche ALT enfoncée, appuyer sur la touche TEST.

•Les diodes rouge et verte clignotent pendant la vérification.

Nota: Si les diodes rouge et verte ne clignotent pas, remplacer la pile 9 V.

•Si la batterie est chargée, la diode verte s’allume pendant environ deux (2) secondes.

Nota: Si la diode verte ne s’allume pas pendant environ deux (2) secondes à la fin de la vérification, il sera nécessaire de refaire le chargement des données dans la boîte.

– 14 –

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Installer’s Guide Manuel d’installation Panasonic Canada INC Hospitality Systems Table of Contents Entretien et nettoyage Care and CleaningInstallation Optional Equipment Connections Adding Mounting Brackets To The TelevisionFixation d’un support de montage Branchement d’appareils auxiliaires MagnétoscopeLocation of Controls/Emplacement des commandes Branchement d’appareils auxiliaires suiteRemote Control / Télécommande EUR501450Main Menu Menu principal Auto Set-up TV ModeAuto réglage initial Mode télé Basic NavigationSet Up Menu Hotel Mode Menu de réglage Mode hôtelTableau des caractéristiques dans le mode hôtel Hotel Mode Feature TableSetting the Master Television Paramétrage du téléviseur MaîtreUploading Television Settings into the Clone Box Learn Downloading Settings into Other Televisions TeachSetting Individual Volume Limits Réglage de volume maximum sur chaque appareilVérification des paramètres dans la boîte de clonage Testing the Settings in the Clone BoxTesting the Clone Box Battery Vérification de la pile de la boîte de clonageSwitching to Hotel Mode All Models Resetting the Television to Normal TV ModeRétablissement du mode normal sur le téléviseur Switching to Normal TV ModeTroubleshooting Chart Guide de dépannage

CT-3233H, CT-2733H specifications

The Panasonic CT-2733H and CT-3233H are part of Panasonic's prestigious line of CRT televisions, renowned for their classic design and robust performance. These models emerged during an era when CRT technology was at its peak, delivering impressive picture quality and sound, while also emphasizing user-friendly features.

The CT-2733H, with its 27-inch screen size, offers an engaging viewing experience, while the CT-3233H, with a larger 32-inch display, delivers an even more immersive atmosphere for movies and sports. Both models feature a sleek and compact design that makes them an attractive addition to any entertainment setup. Their traditional boxy frame is balanced with a modern aesthetic, appealing to both vintage enthusiasts and contemporary users.

One of the standout technologies in these models is Panasonic's advanced picture tube technology. The high-grade cathode ray tube ensures vibrant colors and deep contrasts. Panasonic’s Pure Flat technology minimizes reflections from ambient light, enhancing the viewing experience irrespective of the room's lighting conditions. This is complemented by the Aqua Blue color filter, which provides superior color accuracy, enhancing the overall image quality.

The audio performance of the CT-2733H and CT-3233H is equally commendable. Each television is equipped with powerful built-in speakers that serve up clear and dynamic sound. Enhanced audio processing functions ensure dialogue clarity and thumping bass which is essential for an immersive viewing experience, whether watching a movie or listening to music.

In terms of user convenience, both models come equipped with multiple input options, including composite and S-Video inputs, allowing users to connect various devices such as DVD players, gaming consoles, and VCRs. The on-screen menu offers straightforward navigation, giving users easy access to settings for picture, sound, and channel configuration.

The durability of Panasonic products is well documented, and these CRT models are no exception. Built with quality components, they are designed to last, providing years of reliable performance. While CRT technology has largely been replaced by LCD and LED alternatives, the CT-2733H and CT-3233H continue to appeal to those who appreciate the charm of traditional televisions.

In conclusion, the Panasonic CT-2733H and CT-3233H represent an intersection of classic design, advanced technology, and reliable performance, making them a valued choice for enthusiasts of vintage and high-quality television sets.
Top Page Image Contents