Panasonic CT-3233H, CT-2733H manual Setting Individual Volume Limits

Page 13

Setting Individual Volume Limits

This procedure allows the maximum volume level to be changed on individual televisions.

!For lower volume

The television must be in HOTEL mode.

1.Turn television ON.

2.Adjust the television volume to desired level.

Note: This will become the new maximum volume level.

3.Press the POWER ON button on the clone box.

The LEDs will flash red and green to confirm power is ON.

4.Connect the clone box to the Digital Interface port on the back of the television.

5.Hold the ALT button while pressing the LEARN button on the clone box.

The red LED will flash while the data is uploaded into the box. The green LED will light for about two (2) seconds when the procedure is complete.

6.Disconnect the clone box from the television and turn it OFF.

7.Reset the volume on the television.

8.Refer to the section entitled Downloading Settings into Other Televisions (TEACH).

!For higher volume

The television must be in Normal TV mode. Refer to the section entitled Resetting the Television to Normal TV mode.

1.Turn television ON.

2.Adjust the television volume to the minimum setting.

3.Press the POWER ON button on the clone box.

The LEDs will flash red and green to confirm power is ON.

4.Connect the clone box to the Digital Interface port on the back of the television.

5.Adjust the television volume to maximum desired level.

6.Hold the ALT button while pressing the LEARN button on the clone box.

Réglage de volume maximum sur chaque appareil

Cette procédure permet de fixer le volume maximum sur chacun des téléviseurs.

!Volume plus bas

Le téléviseur doit être dans le mode HÔTEL.

1.Mettre le téléviseur en marche.

2.Régler le volume au niveau désiré.

Nota: Le niveau réglé devient le nouveau niveau maximum.

3.Appuyer sur la touche POWER ON de la boîte de clonage.

Les diodes clignotent (vert et rouge) pour confirmer la mise en marche.

4.Brancher la boîte de clonage dans le port d’interface numérique sur le panneau arrière du téléviseur.

5.Tout en maintenant la touche ALT enfoncée, appuyer sur la touche LEARN.

La diode rouge clignote pendant le chargement des données. La diode verte s’allume pendant environ deux (2) secondes une fois le chargement terminé.

6.Débrancher la boîte de clonage du téléviseur, puis la mettre hors marche.

7.Refaire le réglage du volume sur le téléviseur.

8.Se reporter à la section Téléchargement des paramètres sur d’autres téléviseurs (TEACH).

!Volume plus haut

Le téléviseur doit être dans le mode normal. Se reporter à la section Rétablissement du mode normal sur le téléviseur.

1.Mettre le téléviseur en marche.

2.Régler le volume au niveau minimum.

3.Appuyer sur la touche POWER ON de la boîte de clonage.

Les diodes clignotent (vert et rouge) pour confirmer la mise en marche.

4.Brancher la boîte de clonage dans le port d’interface numérique sur le panneau arrière du téléviseur.

5.Régler le volume maximum désiré sur le téléviseur.

6.Tout en maintenant la touche ALT enfoncée, appuyer sur la touche LEARN.

– 13 –

Image 13
Contents Installer’s Guide Manuel d’installation Panasonic Canada INC Hospitality Systems Table of Contents Installation Care and CleaningEntretien et nettoyage Fixation d’un support de montage Adding Mounting Brackets To The TelevisionOptional Equipment Connections Branchement d’appareils auxiliaires MagnétoscopeBranchement d’appareils auxiliaires suite Location of Controls/Emplacement des commandesEUR501450 Remote Control / TélécommandeAuto réglage initial Mode télé Auto Set-up TV ModeMain Menu Menu principal Basic NavigationMenu de réglage Mode hôtel Set Up Menu Hotel ModeHotel Mode Feature Table Tableau des caractéristiques dans le mode hôtelParamétrage du téléviseur Maître Setting the Master TelevisionDownloading Settings into Other Televisions Teach Uploading Television Settings into the Clone Box LearnRéglage de volume maximum sur chaque appareil Setting Individual Volume LimitsTesting the Clone Box Battery Testing the Settings in the Clone BoxVérification des paramètres dans la boîte de clonage Vérification de la pile de la boîte de clonageRétablissement du mode normal sur le téléviseur Resetting the Television to Normal TV ModeSwitching to Hotel Mode All Models Switching to Normal TV ModeTroubleshooting Chart Guide de dépannage

CT-3233H, CT-2733H specifications

The Panasonic CT-2733H and CT-3233H are part of Panasonic's prestigious line of CRT televisions, renowned for their classic design and robust performance. These models emerged during an era when CRT technology was at its peak, delivering impressive picture quality and sound, while also emphasizing user-friendly features.

The CT-2733H, with its 27-inch screen size, offers an engaging viewing experience, while the CT-3233H, with a larger 32-inch display, delivers an even more immersive atmosphere for movies and sports. Both models feature a sleek and compact design that makes them an attractive addition to any entertainment setup. Their traditional boxy frame is balanced with a modern aesthetic, appealing to both vintage enthusiasts and contemporary users.

One of the standout technologies in these models is Panasonic's advanced picture tube technology. The high-grade cathode ray tube ensures vibrant colors and deep contrasts. Panasonic’s Pure Flat technology minimizes reflections from ambient light, enhancing the viewing experience irrespective of the room's lighting conditions. This is complemented by the Aqua Blue color filter, which provides superior color accuracy, enhancing the overall image quality.

The audio performance of the CT-2733H and CT-3233H is equally commendable. Each television is equipped with powerful built-in speakers that serve up clear and dynamic sound. Enhanced audio processing functions ensure dialogue clarity and thumping bass which is essential for an immersive viewing experience, whether watching a movie or listening to music.

In terms of user convenience, both models come equipped with multiple input options, including composite and S-Video inputs, allowing users to connect various devices such as DVD players, gaming consoles, and VCRs. The on-screen menu offers straightforward navigation, giving users easy access to settings for picture, sound, and channel configuration.

The durability of Panasonic products is well documented, and these CRT models are no exception. Built with quality components, they are designed to last, providing years of reliable performance. While CRT technology has largely been replaced by LCD and LED alternatives, the CT-2733H and CT-3233H continue to appeal to those who appreciate the charm of traditional televisions.

In conclusion, the Panasonic CT-2733H and CT-3233H represent an intersection of classic design, advanced technology, and reliable performance, making them a valued choice for enthusiasts of vintage and high-quality television sets.