Sylvania 6260VF Recording Features, Hints for Timer Recording, Copying a Video Tape

9. Recording Features

Timer Recording

•Insert a tape with its record tab into the unit.

Hints for Timer Recording

• If there is a power failure or the unit has been unplugged for more than 30 sec-

1

MENU

2

STOP PLAY

or

	- M E N U -			5 Select the desired start
B TIMER PROGRAMMING
				time (hour).
AUTO REPEAT [OFF]
CHANNEL SET UP				STOP	PLAY	ONE TIME PROGRAM
				or		PROGRAM NUMBER			1
						DATE		10 / 2 4	MON
TIMER PROGRAMMING
						START TIME		0 7 : 3 0	– –
					F.FWD
PROG		12345678				END	TIME	– – : – –	– –
						CHANNEL		– –
DATE
						REC SPEED		– –
START TIME				Select the
Available program
number flashes.				minute
	F.FWD			STOP	PLAY
				or
PROGRAM NUMBER			1				F.FWD
DATE		– – / – –
START TIME		– – : – –	– –
END	TIME	– – : – –	– –
CHANNEL		– –

9		ONE TIME PROGRAM
STOP	PLAY	PROGRAM NUMBER		1
		DATE	1 0 / 2 4	MON
or		START TIME	0 7 : 3 0	PM
		END TIME	0 8 : 3 0	PM
		CHANNEL	1 6
		REC SPEED	SP
		B SP
			SLP
	Select the desired recording speed.
		C.RESET
		EXIT
10 Turn off the			POWER

VCR for recording

•TIMER indicator on the VCR lights up.

Hint

onds, the clock setting and all timer settings will be lost.

• If the tape runs out before the end time, the unit will switch to the Stop mode

immediately, eject the tape and the power will be turned off. The TIMER indicator

will flash.

• If a tape is not in the unit or does not have the record tab, the TIMER indicator

flashes and timer recording cannot be performed. Please insert a recordable tape.

• When all the Timer Recording are completed, the TIMER indicator flashes.

To play or eject the recorded tape, hit [POWER] first, and then press

[PLAY B] or [EJECT A].

To cancel a Timer Recording that is in progress

Hit [STOP/EJECT C / A] on the unit.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes

may be an infringement of copyright laws.		(Back of TV)
(Back of Playing VCR)	(Back of Recording VCR*)

REC SPEED – –	6		ONE TIME PROGRAM
Select an empty program
			PROGRAM NUMBER		1
number.	STOP	PLAY
			DATE	1 0 / 2 4	MON
			START TIME	0 7 : 3 0	PM
F.FWD	or		END TIME	– – : – –	– –
			CHANNEL	– –
			REC SPEED	– –	AM
				B PM

•To go back one step, hit [REW h] (during steps 3) to 9) ).

To Check, Correct, or Cancel a Timer Program

AUDIO		ANT
L		IN
OUT	IN
R		OUT
VIDEO
OUT	IN

1

Connect

AUDIO		ANT
L		IN
OUT	IN
R		OUT
VIDEO
OUT	IN

2

Connect

RF Cable

(supplied)

3

STOP PLAY

or

Select “AM” or “PM”.

PROGRAM NUMBER 1

F.FWD

B ONCE

DAILY

WEEKLY

	7 Repeat the procedure in steps
Select “ONCE”, “DAILY”
(Mon-Fri), or “WEEKLY”.	5 and 6 to set the end time.

1) Turn the power on by hitting
	[POWER].
2)	Select main menu by hitting
	[MENU].
3)	Select "TIMER PROGRAM-
	MING" by pressing [PLAY B] or
	[STOP C]. Then, hit
	[F.FWD g].

Audio/Video Cables	*Front input jacks are also available
(not supplied)

1)	Insert a pre-recorded tape into the playing VCR.
2)	Insert a tape with its record tab into the recording VCR.
3)	Hit [SPEED] on the remote control of the recording VCR to select the
	desired recording speed (SP/SLP).
4)	Select the “L1” or “L2” position on the recording VCR.

F.FWD F.FWD

4) Select the program number

which you want to check by

pressing [PLAY B] or

• To use the input jacks on the back of this unit, select "L1" position by
hitting [0], [0], [1] on the remote control or [CHANNEL	].
• To use the input jacks on the front of this unit, select "L2" position by

4Select the desired month.

STOP	PLAY	ONE TIME PROGRAM
	or	PROGRAM NUMBER			1
		DATE	1	0 / 0 3	MON
		START TIME	– – : – –		– –
	F.FWD	END TIME	– – : – –		– –
		CHANNEL	– –
		REC SPEED	– –

8

STOP PLAY

or

ONE TIME PROGRAM
PROGRAM NUMBER		1
DATE	1 0 / 2 4	MON
START TIME	0 7 : 3 0	PM
END TIME	0 8 : 3 0	PM
CHANNEL	1 6
REC SPEED	– –

Select the desired channel.

[STOP C]. The details of the

program you selected will

appear on the TV screen.

• Go to the digit you want to

change by pressing

[F.FWD g] or [REW h].

Then, enter correct numbers by

pressing [PLAY B] or

	hitting [0], [0], [2] on the remote control or [CHANNEL	].
5)	Hit [REC/OTR] on the recording VCR.
6)	Begin playback of the tape in the playing VCR.
7)	To stop recording, hit [STOP/EJECT C / A] on the recording VCR,
	then stop playback of the tape in the playing VCR.

Hint

Select the desired day.

STOP PLAY

or	• You can program one
	year in advance.
	F.FWD

•If you have connected the unit to a cable box or satellite box as the Connection on page 1, select the VCR to channel 3 or 4 (the RF output channel of the VCR).

Then, select the desired channel at the cable box or satellite box. Leave the cable box or satellite box on for timer recording.

F.FWD

[STOP C].

• You may cancel the entire pro-

gram by hitting [REW h] while

the program number flashes.

5)Hit [C.RESET/EXIT] to exit.

6)Hit [POWER] to return to timer stand-by mode.

- 6 -

•For best results during dubbing, use the VCR’s front panel controls whenever possible. The remote control might affect the playing VCR’s operation.

•Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended.

•You can use a video disc player, satellite receiver, or other audio/video component with A/V outputs.

•“L1” or “L2” is found before the lowest memorized channel. (Example: CH02)

•"L2" input jacks are on the front of this unit.

EN