Panasonic AG-520VDH manual Tuning TV, Initial Setup Ready to Play, Automatic Channel Setting

Tuning TV

EJECT
POWER
			NUMBER Keys
			ADD/DLT
ACTION
SELECT
ŸźŻŹ/
SET
CH Ÿź
STOP
POWER	STOP/EJECT	PLAY	FF

Initial Setup (Ready to Play)

Please make all cable or antenna connections before powering on. Plug the unit power cord into an AC wall outlet.

1 Press POWER on the Remote Control or unit. Auto channel and clock set start.

•If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS receiver, it must be turned off.

CH AUTO SET PROCEEDING

AUTO CLOCK SET

PROCEEDING

CANCEL:STOP

•Function buttons are void during Initial Setup.

•To eject a tape during Auto Set, press the unit STOP/EJECT button twice. Then, make settings manually. (See pages 14-15.)

•If Auto Clock Set takes more than 30 minutes, press STOP and perform settings manually. (See pages 14-15.)

Case 1	10/25/2005 TUE 11:45AM
Settings are made automatically. When	DST:ON
	SETTING : CH 10
complete, this screen appears.	AUTO CLOCK SET

COMPLETED

Case 2

If setup is incomplete, the following	AUTO CLOCK SET
screen appears. Check connection of	IS INCOMPLETE
Antenna/Cable to the RF in Terminal,	PRESSING ACTION KEY
then try to manually set the clock as
	PLEASE SET CLOCK BY
follows.

a. Press ACTION on the Remote Control to display SET CLOCK Menu screen.

SET CLOCK

1/ 1/2005 SAT 12:00AM

DST:ON

SELECT: SET:SET

START :ACTION

b. Press Ÿź to select the month and press SET to set. In the same manner, select and set the date, year, time, and DST (Daylight Saving Time).

•Press Ż repeatedly to move the cursor. Press Ÿź to make a correction.

SET CLOCK

10/25/2005 TUE 11:45AM

DST:ON

SELECT: SET:SET

START :ACTION

c. Press ACTION twice to start CLOCK and exit.

Automatic Channel Setting

1 Press ACTION to display MAIN MENU.

2 Press ŸźŻŹ to select “CH.”

	MAIN MENU
DVD	LOCK LANGUAGE
TV	CLOCK	CH

SELECT: SET:SET

END :ACTION

3 Press SET to display SET UP CHANNEL screen.

SET UP CHANNEL

ANTENNA : CABLE

AUTO SET

WEAK SIGNAL DISPLAY:OFF

SELECT: SET:SET

END :ACTION

4 Press Ÿź to select “ANTENNA,” then press SET to set your antenna system (“TV” or “CABLE”).

5 Press Ÿź to select “AUTO SET,” then press SET.

Note:

•After Channel Auto Set is finished, Clock Auto Set will be performed. (If clock is set manually, Clock Auto Set will not be performed.)

TV Operation

13