Remote Control VCR/LD/DVD Operation
Manufacturers’ Code Settings
This remote control has been designed to work with a variety of VCRs, Laser Disc players and DVD players. In order for this to occur, the setting for the VCR, LD or DVD must be programmed into the Remote Control.
1.To set a VCR, slide the remote control 
to VCR.
To set a LD or DVD, slide the remote control 
to LD/DVD.
2.Push the remote control VCR - LD/DVD Power Button 
and keep it Pushed.
3.Enter the Manufacturer’s 
(The codes are shown below).
4.Push the STOP button 
.
5.Release the remote control VCR or LD/DVD Power Button 
.
6.Check the operation of the VCR, LD or DVD. If it does not operate correctly, repeat steps 1 to 5 and use an alternate code (if there is one).
VCR CODES
Manufacturer | Code |
|
| Manufacturer | Code |
|
|
|
|
|
|
Panasonic / | 10, 11, 12, 13 |
|
| NEC | 40, 41, 42, 43 |
National |
|
|
| ORION | 45, 46 |
AIWA | 15, 16 |
|
| Philips | 50 |
FUJITSU | 20 |
|
| SANYO | 55, 56, 57, 58 |
HITACHI | 25, 26, 27 |
|
| SHARP | 60, 61 |
JVC | 30, 31, 32 |
|
| SONY | 65, 66, 67 |
MITSUBISHI | 35, 36 |
|
| TOSHIBA | 70, 71 |
LD CODES |
|
|
|
|
|
|
|
|
|
| |
Manufacturer | Code |
|
| Manufacturer | Code |
|
| ||||
|
|
|
|
|
|
Panasonic | 10, 11, 12, 13 |
|
| SAMSUNG | 30 |
KENWOOD | 15, 16 |
|
| SHARP | 35 |
PHILIPS | 20 |
|
| SONY | 40, 41, 42, 43 |
PIONEER | 25 |
|
|
|
|
DVD CODES |
|
|
|
|
|
|
|
|
|
| |
Manufacturer | Code |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
Panasonic | 70 |
|
|
|
|
|
|
|
|
|
|
NOTES:
1.If the batteries are removed from the remote control the Manufacturer’s codes are lost and must be reprogrammed.
2.The list of manufacturer’s codes is given as a guideline only. Panasonic cannot guarantee that any other manufacturer’s product will work with this remote control.
30