Remote Control Television Operation, Standby

Remote Control Television Operation

BUTTON

WHAT IT DOES

STANDBY

The remote control button is used to turn the television into Stand-By mode. When the television is in Stand-By it is possible to turn it back on by Pushing this remote control Power Button, the Programme Number UP or DOWN Button (front panel or remote control) or any of the direct Programme Number Buttons.

PICTURE

This button is used to select the picture menu. Please refer to page 13 for detailed operating instructions.

SOUND

This button is used to select the sound menu. Please refer to page 15 for detailed operating instructions.

SET UP

This button is used to select the set up menu. Please refer to page 17 for detailed operating instructions.

STEREO / MONO

Pushing the button changes the mode from Stereo ( ) to Mono ( ) and back again. Normally the television will detect whether the broadcast signal is Mono or Stereo and will set the mode accordingly. If the Stereo signal is weak or if the receiving conditions are not the best, it is recommended that the Mono mode be manually selected.

BILINGUAL *

This system allows two languages to be transmitted on one signal. Switching between the Main ( I ) and Sub ( II ) positions selects the desired language.

*Note: Bilingual sound is not currently available in Australia.

100Hz / PROGRE

This button allows you to change the Picture refresh setting between AUTO, 100Hz MODE and PROGRESSIVE. Please refer to SCAN MODE on page 13.

SURROUND

This button switches the SURROUND Sound on and off.

ASPECT

This button is used to move through the different aspect options of AUTO, 4:3, 16:9 and S-ZOOM. Please refer to page 18.

Note: AUTO is only available in AV Mode.

RECALL

Pushing this button will display all current active functions. The functions that can be displayed include AV Number, Programme Number, Sound Option, Picture Option, Stereo or Mono and Off-Timer setting. Pushing the button again cancels the recall function and removes the text being displayed on the screen.

If the button is not Pushed within about 2 seconds it automatically switches to display the Programme Number or the AV Number and the Off-Timer setting.

Pushing the button again cancels the recall function and removes the text being displayed on the screen.

Please refer to drawing on Page 7 for location of Remote Control Buttons.