KT-1000
•Pulse Count FM Detector
•Direct RF Conversion with Selector
•
•
•Independent local oscillator power supply
•
•High quality design AM section
•Narrow and Wide IF band selection for both FM and AM
KT-900
•Pulse Count FM Detector
•
•
•High quality design AM section
•
•Digital frequency display
•Clean reception filter
•Narrow and Wide IF band selection for FM
KT-800
New, clean panel with
Preset automatic selection of up to 8 FM or AM stations
FM/AM preset station random access
Operational convenience and flexibility Switchable digital display of frequency or time as needed
New signal strength and
FM usable sensitivity: 23.3 dBf (8.0>V) in Direct RF Conversion mode 10.3 dBf (1.8/A/) in normal mode
FM THD at 1 kHz: 0.03% (mono), 0.04% (stereo)
Alternate channel selectivity: 65 dB at 300 kHz (NARROW) 45 dB (WIDE)
Stereo separation at 1 kHz: 60 dB (WIDE), 50 dB (NARROW)
Frequency response: 15 Hz to 15 kHz ±0.5 dB
FM usable sensitivity: 10.8 dBf (1.9^V)
FM THD at 1 kHz: 0.03% (mono), 0.04% (stereo)
Alternate channel selectivity: 65 dB at 300 kHz (NARROW) 45 dB (WIDE)
Stereo separation at 1 kHz: 55 dB (WIDE), 47 dB (NARROW)
Frequency response: 30 Hz to 15 kHz +0 .2 dB, - 0 . 8 dB
• FM usable sensitivity: 10.8 dBf (1.9/iV)
• FM THD at 1 kHz: 0.07% (mono), 0.09% (stereo)
• Alternate channel selectivity: 60 dB
• Stereo separation at 1 kHz: 50 dB
•
• Frequency response: 30 Hz to 15 kHz +0.2 dB, - 2 d B