Tuning and Editing Channels, Setup | Panasonic TH-60A430K specs

No signal Power off

Automatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is performed for 10 minutes.

●The notification message will appear 3 minutes before going into Standby mode.

Setup

Eco Navigation

Sets the TV to operate in the most energy-saving mode.

●You can also access this item by using [VIERA TOOLS].

Child Lock (p. 10)

Tuning Menu (p. 13)

Language

■OSD Language

Changes language for on-screen displays.

Display Settings

■Input Labels

Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in [Input Selection] (p. 9) or banner.

●To skip the input mode, select [Skip].

■Banner Display Timeout

Sets how long the Information banner stays on screen.

■Playing Time Display

Set to [On] to display time spent using Game mode on the top right of the screen every 30 minutes.

●This function is available when [Game Mode] (p. 11) is set to [On].

VIERA Link Settings

■VIERA Link

Sets to use VIERA Link functions [On] / [Off].

■Power on Link

When an HDMI connected equipment starts playback, the TV is turned on and input mode is switched automatically.

●Only when the TV is in Standby mode.

■Power off Link

When the TV is set to Standby mode, the HDMI connected equipment is also automatically set to Standby.

■Standby Power Save

Controls the connected equipment to reduce power consumption in Standby.

●This function is available when [VIERA Link] is set to [On] and [Power off Link] is set to [On].

■Intelligent Auto Standby

Makes non-watched or non-used HDMI connected equipment go into Standby mode to reduce the power consumption.

●This function is available when [VIERA Link] is set to [On].

System Menu

■Shipping Condition

Resets all settings to the original condition.

■License Menu

Displays the software licence information.

Other Settings

■Power Save

Reduces brightness of the picture to economise on power consumption.

Help

■TV Self Test

Makes a diagnosis of picture or sound problems

●Follow the on-screen instructions.

■System Information

Displays the system information of this TV.

Tuning and Editing Channels

You can retune channels or make your favourite channel lists, skip unwanted channels, etc.

[Setup] [Tuning Menu]

Auto Tuning

Automatically retune all channels received in the area.

[Manual Tuning] (Analogue TV)

Set Analogue TV channel manually after Auto Tuning.

Manual Tuning

1			CH2
Fine Tuning

Manual Tuning	1			120
Sound System			5.5MHz
Colour System			Auto
		Store

■[Fine Tuning]: Use to make small adjustments to the tuning of an individual channel (affected by weather conditions, etc.)

■[Manual Tuning]: Set Analogue TV channel manually after Auto Tuning.

–Set Sound System and Colour System, and then perform this function. Set Colour System [Auto] normally.

–If a VCR is connected only with the RF cable, select channel position [0].

1 Select the channel position

2Select the channel

3Search

4Select [Store]

English 13