Mintek High Definition Personal Video Recorder To select this Press this button Set-top Then

SETUP WIZARD

Prepare the set-top to send picture formats that your HDTV supports

If your HDTV displays a black screen when you turn it on, the set-top may be sending a picture format that your HDTV does not support. Prepare the set-top to send all picture formats that your HDTV supports. Later, while watching TV,you will be able to toggle among the different settings to select the format that provides the best picture quality for the program you are watching.

Complete these steps to prepare the set-top to deliver programming in the picture format settings that your HDTV supports.

Important: Before you start, read these instructions carefully.When you get to step 5, you have 20 seconds to begin selecting picture format settings. After 20 seconds, the set-top is no longer in the Picture Format mode. If this occurs, repeat this process, starting at step 2.

1.Refer to the user guide that came with your HDTV to find the picture formats that your HDTV supports.

2.If the set-top is turned off, press the POWER key to turn it on.

3.On the front of the set-top, press and hold the SELECT button until the message light blinks.

4.Then, press the VOL– key to indicate that you want to select a picture format setting. The LED display shows HdSr to indicate that the set-top is in the Picture Format mode for HDTV settings.

5.In the following table, find each of the picture formats that your HDTV supports. Then, press the corresponding buttons on the front panel of the set-top.

Note: If 1080i is one of the settings that your HDTV supports, we suggest you select it last. Then, when you turn on the TV to use the Setup Wizard, the picture format will be 1080i.

To select this	Press this button	The set-top	And then
picture format:	on the front panel:	briefly displays:	briefly displays:
480i	CH+	480i	SEt
720p	VOL–	720p	SEt
480p	CH–	480p	SEt
1080i	VOL+	1080	SEt

58