DVD Playback
Preparation:
Disc Loading Steps:
1.Connect the unit to the power supply and press the POWER to turn on the unit.
2.Press the SOURCE button and select DVD mode.
3.Handing the disc with its printed side outward vertically to the disc tray and gently insert the disc into the disc tray.
4.The disc will draw into the unit and load automatically.
Warning: Do not play poor quality, scratched or warped discs that may damage the player's lens or impede the loading mechanism.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If the codes don't match, the disc cannot be played. This player's default code is region 4.
Play
Press the PLAY button to start playback.
Stop
During playback, press the 
STOP button once to stop playback and press the 
PLAY button to resume normal playback. Press this button twice repeatedly to stop playback completely.
Previous and Next
Press the 
Previous button to go to the next chapter. Press the 
Next button once to return to the beginning of the current chapter or track; press it twice to go to the previous chapter.
24