Mintek 27HL85 owner manual Adjusting the picture quality, Using the Black stretch feature

Page 41

Adjusting the picture quality

You can adjust the picture quality to your personal preferences, including the contrast, brightness, color, tint, sharpness, Black stretch, MPEG NR, CableClear DNR, and color temperature.

Selection	x		Pressing	•
contrast	lower			higher
brightness	darker			lighter
color	paler			deeper
tint	reddish			greenish
sharpness	softer			sharper
Black stretch	On/Off			Off/On
MPEG NR	Off	Low	Middle	High
DNR	Low		Middle	High
color temperature	cool	medium		warm

To adjust the picture quality:

1.Press MENU, and then press x or • until the PICTURE menu appears.

2.Press z or y to highlight PICTURE SETTINGS, then press

ENTER.

The PICTURE SETTINGS

menu appears.		PICTURE SETTINGS			1/2

	BACK LIGHT				100
	CONTRAST
3. Press y or z until the item	CONTRAST				100

	BRIGHTNESS				50
you want to adjust is
you want to adjust is	COLOR				50

highlighted.	TINT				0
highlighted.	SHARPNESS				0
	SHARPNESS				0

	MENU BACK EXIT WATCH TV
4. Press x or • to adjust the level.
	CONTRAST				80

The PICTURE qualities you adjusted will be saved in the TVÕs memory.

You can keep these settings or choose factory set options, as described under ÒSelecting the picture modeÓ on page 40.

Using the Black stretch feature

This corrects the contrast balance of the black area in the picture. The effect depends on the condition of the video signal.

1.Press MENU, and then press x or • until the PICTURE menu appears.

2.Press y or z to highlight PICTURE SETTINGS, and then press

ENTER.

The PICTURE SETTINGS menu appears.

3.Press y or z to highlight BLACK STRETCH.

PICTURE SETTINGS		2/2

BLACK STRETCH	ON
MPEG NR	HIGH
CableClear DNR	AUTO
COLOR TEMPERATURE	MEDIUM

MENU BACK EXIT WATCH TV

4. Press x or • to select ON.

BLACK STRETCH

ON

To turn off the Black stretch

Select OFF in step 4 above.

TV/VIDEO RECALL POWER

INFO

1 2 3

4 5 6

			7	8	9
			+10		CHRTN
			100	0	ENT
			NU		G
			E	FAV	UI
		P	M	FAV	PIC	D
	O	P	FAVORITE		PIC	E
T	O				SIZE
T

		MENU				MENU
		DVDMENU				yzx •
E ENTE				EXIT		R
N	R			EXIT	A	R
T	R	FAV				ENTER
E		FAV
R				LE
R				C
TV		CH	VOL
CBL/SAT		CH	VOL
VCR
DVD
	POP DIRECT CH MUTE			SLEEP
TV/VCR		PAUSE	STOP	PLAY
		FREEZE	SOURCE	SPLIT
REW		FF	SKIP/SEARCH
CH SCAN		SWAP	POP CH
REC				LIGHT

TV/VIDEO RECALL POWER

INFO

1 2 3

4 5 6

			7	8			9
			+10			CHRTN
			100	0			ENT
			NU				G
			E	FAV			UI
		P	M	FAV			PIC	D
	O	P	FAVORITE				PIC		E
T	O						SI
							ZE
				MENU						MENU
				DVDMENU						yzx •
				DVDMENU
		ENTER					EXIT			R
N							EXIT			R
E
	T			FAV					A
		E		FAV					A
			R					LE		ENTER
			R				C

	TV			CH		VOL
	CBL/SAT			CH		VOL
	VCR
	DVD
			POP DIRECT CH MUTE				SLEEP
TV/VCR				PAUSE	STOP		PLAY
				FREEZE	SOURCE		SPLIT
		REW		FF		SKIP/SEARCH
CH SCAN				SWAP		POP CH
		REC					LIGHT

E

F

S

Introduction

Connecting	yourTV


Usingthe	remotecontrol


Settingup	yourTV


UsingtheTVÕs	Features

Appendix

41

Index

Image 41

Contents 27HL85 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare cont. from previous column ServiceImportant notes about your LCD TV Introduction Check that you have the accessories and items shown Supplied accessoriesIntroduction Welcome to ToshibaVideo Exploring your new TVChannels Connecting your TVConnecting an antenna or cable TV Connecting a cable converter box and VCR Connecting a VCRIntroduction Connecting yourTV Connecting a DVD player or satellite receiver and a VCRDVD player with component video For Hdmi or DVI connection, see Connecting a camcorder Connecting two VCRs¥ one Hdmi cable type a connector Connecting an HDMIª or a DVI device to the Hdmi input¥ one HDMIÐtoÐDVI adapter cable Hdmi type a connector ¥ one pair of standard analog audio cablesPreparing the remote control for use Using the remote controlInstalling the remote control batteries Remote control effective rangeFor future reference, write down the codes you used Remote control codesRemote control codes Introduction Connecting YourTV Control CLEAR/EXIT Remote Control function key chartConnecting YourTV Control Learning about the remote controlLearning about the menu system Setting up your TVPress x or to highlight your desired language Changing the on-screen display languageProgramming channels automatically Adding channels to the TVÕs memoryAdding and erasing channels manually Changing channelsAdjusting the channel settings Using the TVÕs featuresSwitching between two channels using Channel Return Programming your favorite channelsConnecting Labeling channels Selecting the picture size Viewing the wide-screen picture formatsTheaterwide 1 picture size For 43 format programs Adjusting the Picture SIZE/POSITION Press x or to select on Using the Auto Aspect featurePress y or z to highlight Auto Aspect Selecting the gray level of the side panels Using the Gray screen functionUsing the V-CHIP menu Using the Locks menuEntering the PIN code If you cannot remember your PIN codeTV Rating Independent rating system for broadcasters OFF To release your setting UnlockTV Rating menu appears Press z or y to select an item Repeat steps 2 and 3 to set the next itemChip menu Mpaa Rating Independent rating system for moviesRepeat steps 2 and 3 for other channels Locking channelsUnlocking programs temporarily Repeat for other channels Changing the PIN code Locking the video inputsSelecting the picture mode Adjusting the pictureAdjusting the back light feature Press x or to select the mode you preferUsing the Black stretch feature Adjusting the picture qualityPress x or to select HIGH, MIDDLE, LOW, or OFF Using the Mpeg NR featureUsing the CableClear¨ DNR feature Selecting the cinema mode Selecting the color temperatureLabeling the video input sources Selecting the video input source¥ To view text, highlight T1, T2, T3, or T4 Using the closed caption featurePress x or to highlight C1-C4 or T1-T4 Setting the on timer Setting the sleep timerSelecting stereo/SAP broadcasts Adjusting the soundMuting the sound Using the WOWª surround sound feature To turn off the StableSound feature Select OFF in above Adjusting the sound qualityUsing the StableSound¨ feature Displaying on-screen information Understanding the auto power off featureUnderstanding the last mode memory feature Appendix SpecificationsAntenna TroubleshootingBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Channel programming IndexToshiba ELECTROMEX, S.A. DE C.V