Grundig GULCD15S/DVD instruction manual Quick TV Set-Up Guide, Adjusting the view angle

Page 13

Quick TV Set-Up Guide

10

Adjusting the view angle

Press down on the stand and gently adjust the set to a suitable viewing angle.

The LCD TV monitor can be tilted 10 degrees backward.

Power connection

1.Connect adaptor to power input of TV.

2.Connect adapor to power cord.

3.Connect the other end of power cord to power supply.

POWER

Connecting to An Aerial

75

Connect antenna or CATV cable to the antenna port of the tuner box.

Turning ON/OFF the TV

1.If power input is connected correctly, the LED on the front panel becomes Amber (i.e. stand-by mode). Press the POWER button on the function panel OR press

the red POWER button “ ” of the remote control. The TV will switch on and the LED on the front panel becomes green.

2.To switch the TV off, press the POWER button on the function panel OR press the

red POWER button “ ” of the remote control. The TV will switch off and go to the stand-by mode.

Auto Scan channels

1.Press the AV key and select input source to TV.

2.Press the MENU key on the remote control to show the On Screen Display Menu (OSD).

3.Press ￿ ￿ key to select the TV icon on the top of screen.

4.Press ￿ ￿ key to high-light Auto Scan option. Then press ￿ key to select the Auto Scan option.

5.Once scanning is finished, press MENU to exit.

2

4

5

3

4

1

If you would like the channels on certain numbers please refer to 'Manual scan' on page 24.

-13-

Image 13
Contents LCD TV + DVD Player Table of Contents Risk of electronic shock Do not open Important Safety InstructionsImportant Safety Instructions Electrical Connection Conformity and CompliancePrecautions And Reminders Avoid Dropping Avoid Liquids Avoid Aerosol Cleaners Wall mount set Optional Wall Mounting the SetPanel SpecificationsTV / DVD Remote Control FunctionsFront Panel Function Keys Front Panel ButtonsRear Panel Rear Panel InputsQuick TV Set-Up Guide Adjusting the view angleConnection Instruction Quick Connecting GuideUsing YPbPr Input for DVD Player / VCR PC Connection Connecting PC Instructions19KP10-H9 V OSD Settings MenuRemote Control of TV and DVD OSD Settings Picture OSD Settings Screen & Inputs640 X 59.9 HZ OSD Settings ColorOSD Settings Audio Input Function Peripheral Equipment OSD Settings Input SelectionMTS OSD Settings TV SettingAuto SCAN, to tune channels automatically LABEL, re-name programmes Basic Operations DVD Operation and SettingsDVD OSD Menu Descriptions DVD OSD MenuSpeaker Set-up Downmix has three settings Video SET-UP Default Reset for factory settings Exit the DVD set-up menu Teletext Instructions Using TeletextSymptoms Check Item TV will not turn on / no power TroubleshootingDisposal