Grundig GULCD15S/DVD instruction manual Conformity and Compliance, Electrical Connection

Page 5

Conformity and Compliance

ELECTRICAL CONNECTION

For your safety please read the following information.

Warning:

This appliance must be earthed by connecting to a mains power outlet with a protective earthing connection.

The appliance must be connected to a 220-240 volts 50 cycle AC supply by means of a three pin socket, suitably earthed and should be protected by a 3 amp fuse in the plug or a 3 amp fuse in the consumer unit.

Never use a fused mains plug without the fuse cover.

Never put a naked flame source near or on the television.

If the mains plug is unsuitable for the socket outlet in your home or is removed for any other reason, then the plug should be disposed of SAFELY to prevent the hazard of electric shock.

If a fuse is fitted to the plug, remove the fuse before throwing the plug away.

How to wire a UK mains plug.

The appliance is supplied with a BS1363 plug fitted with a 3 Amp fuse. should the fuse require replacement, it must be replaced with a fuse rated at 3 Amp and approved to BS1362.

Important

The wire in the mains lead on this appliance are colored in accordance with the following code:

Green and Yellow Earth

Blue Neutral

Brown Live

As the colors may not correspond with the markings identifying the terminals in your plug, proceed as follows.

The green and yellow wire must be connected to the terminal in the plug which

is marked with the letter E or with the earth symbol or colored green and yellow.

The blue wire must be connected to the terminal marked N.

The brown wire must be connected to the terminal marked L.

-5-

Image 5
Contents LCD TV + DVD Player Table of Contents Risk of electronic shock Do not open Important Safety InstructionsImportant Safety Instructions Electrical Connection Conformity and CompliancePrecautions And Reminders Avoid Dropping Avoid Liquids Avoid Aerosol Cleaners Wall mount set Optional Wall Mounting the SetPanel SpecificationsTV / DVD Remote Control FunctionsFront Panel Function Keys Front Panel ButtonsRear Panel Rear Panel InputsQuick TV Set-Up Guide Adjusting the view angleConnection Instruction Quick Connecting GuideUsing YPbPr Input for DVD Player / VCR PC Connection Connecting PC Instructions19KP10-H9 V OSD Settings MenuRemote Control of TV and DVD OSD Settings Picture OSD Settings Screen & Inputs640 X 59.9 HZ OSD Settings ColorOSD Settings Audio Input Function Peripheral Equipment OSD Settings Input SelectionMTS OSD Settings TV SettingAuto SCAN, to tune channels automatically LABEL, re-name programmes Basic Operations DVD Operation and SettingsDVD OSD Menu Descriptions DVD OSD MenuSpeaker Set-up Downmix has three settings Video SET-UP Default Reset for factory settings Exit the DVD set-up menu Teletext Instructions Using TeletextSymptoms Check Item TV will not turn on / no power TroubleshootingDisposal