System Connections
Connecting to PC
The unit can be connected to PC (person computer) via the VGA cable. Follow the figure below to connect:
1.Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit.
2.Connect the other end to the PC.
3.Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit.
4.Connect the other end to the PC audio output jack.
5.You had better set the PC's resolution at: 800 x 600@60Hz.
After connection, turn on the unit and the PC, press the SOURCE button to shift to VGA mode.
PC
AUDIO OUT
14