DVD Setup Menu
DVD Setup Menu
This is the place where you arrange all important settings for the cooperation of the DVD with the TV set and other audio equipment.
1.Remove the disc from the DVD drive and press the 'SETUP' button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup, and Preference.
2.Press (direction buttons) on the remote control to select a category.
3.All the items in the category will appear on the TV screen. Press the ENTER button to confirm your selection.
Category
1.When you enter a category all the items under this category will appear, and the items placed in the middle (or highlighted) will be the current set up.
2.Press (right direction button) on the remote control to select the correct category.
3.Press the direction button to select your preference. The item you select will be highlighted.
4.Press the ENTER button to confirm.
5.Press (left direction button) to enter the other setup menu.
General Setup Page
The General Setup is shown as follows:
- - General Setup Page - -
TV Display | Lb | Normal/Lb |
Angle Mark | Off | Normal/Ps |
OSD Lang | Eng | Wide |
Captions | Off |
|
Screen Saver | On |
|
Last Memory | Off |
|
Set TV Display
TV Display
The program's screen format (e.g. Normal TV/Wide screen) is fixed by the DVD. Please note that this format might not necessarily match your TV's screen format. Then this will be helpful:
Normal/LB (LETTER BOX): Choose this mode when your TV set has 4:3 screen format. The picture will appear in its entire width but framed by black bars at the top and the bottom. Normal/PS (PAN SCAN): Choose this mode when your TV set has 4:3 screen format. The picture will fill the screen but the right and left portion will be cut.
Wide (16:9): Choose this mode when using a
16: 9 wide screen TV set.
Angle Mark
If this function is enabled the camera symbol appears on the screen as soon as various perspectives are available on the DVD. Choose "Off" and no camera symbol will appear.
OSD Lang
Please select preferred language for the OSD menus.
28