Basic Playback
Basic Playback
Preparations
Press the DTV/DVD button on the remote control to enter the DVD status.
Note: The unit do not allow enter DVD mode(or place a DVD in the disc slot) again after it have just left to avoid any damage of the DVD. Wait for 10 seconds to enter again.
Basic playback
Data Side
When pressing the D.CALL button repeatedly different OSD indicator will be displayed for different types of disc DVD, CD etc
Stop playback
1.Press STOP 
button to go to stop mode, the TV screen will show the
2.Press ENTER/PLAY to resume playback from the location where playback is stopped.
3.Press STOP twice to stop completely.
1.Place the DVD in the disc slot as figure above. The disc will be loaded automatically after one to two seconds, then the DVD player reads the DVD and displays the opening menu. 
If there is no disc placed on the disc slot in DVD mode, OPEN will display on the screen all the times)
There is only one disc size can be loaded in the disc slot .
Do not place a disc which is unplayable in this DVD player.
Some disc may not playback automatically, you can press PLAY/ENTER button to start playback.
2.Some disc may start playback with a menu, use the cursor button on the remote control to select menu options and press PLAY/ENTER to start, or press digits to select a menu options directly.
Pause playback
Previous and Next
During playback, press PREV 
key can go back to the beginning of this chapter, then each press of this key will skip a chapter till the start of the disc.
(note: Disc function may vary depending on disc format)
Each press of NEXT 
key during playback will skip the current chapter and play the next one.
Fast forward and Fast reverse
1. Press FWD 
to fast forward through the disc. Each time the FWD 
button is pressed, the fast forward motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal.
2. Press PLAY/ENTER to resume normal playback.
3. Press REV 
to fast reverse through the disc.
Each time the REV
button is pressed, the fast reverse motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal.
4. Press PLAY/ENTER to resume normal playback.
Single step playback
1. Press the PAUSE/STEP button to pause the playback.
2. To view the next frame, press the PAUSE/STEP button. Each press of the PAUSE/STEP button advances the film by one frame.
1. Press PAUSE/STEP to pause playback (still mode). The sound will be muted during still mode.
2. Press PLAY/ENTER to resume normal playback.
D.CALL
ZOOM
Press this button can zoom enlarge or lessen the picture. Each time pressed the picture times will be change.
In zoom mode press navigation buttons to move the picture displayed on the screen