FUNAI WV20D5 owner manual Menu Language, Mpaa Rating SET UP, Change Access Code

B MPAA RATING SET UP

Follow steps 1 to 3 in the “V-CHIP SET UP” sec- tion on page 16.

4Select your desired item

Press [K/L] to point to your		PG	[VIEW]
		G	[VIEW]
desired item, then press [ENTER]		PG–13	[VIEW]
		B R	[BLOCK]
to select [BLOCK] or [VIEW].		NC–17	[BLOCK]
		X	[BLOCK]
Selection	Rating Category Explanations
G	General Audience
PG	Parental Guidance suggested.
PG-13	Unsuitable for children under 13
R	Restricted; under 17 requires accompa-
	nying parent or adult guardian
NC-17	No one under 17 admitted
X	Mature audience only

•When you select a rating and set it to [BLOCK], the higher ratings will be blocked automatically. The lower ratings will be available for viewing.

•When you set the lowest rating to [VIEW], all other ratings will automatically be available for viewing.

5Exit the V-Chip setting mode

Press [SETUP] to exit the menu.

C CHANGE ACCESS CODE

Follow steps 1 to 3 in the “V-CHIP SET UP” sec- tion on page 16.

4 Enter New code

Press the Number buttons to enter	NEW CODE
		X X X X
your desired access code in the
“NEW CODE” space, then enter	CONFIRM CODE
	_ _ _ _
the same code in the “CONFIRM
CODE” space. When completed,

the menu will return to “V-CHIP SET UP”.

• Make sure you enter exactly the same new code in the “CONFIRM CODE” space as one in the “NEW CODE” space. If they are different, the “NEW CODE” space is cleared for redoing.

5Exit the V-Chip setting mode

Press [SETUP] to exit the menu.

NOTE:

•Your personal access code will be erased and will return to the default (0000) when a power failure occurs or when you turn off the power using a wall switch. If you have forgotten the code, unplug the power cord for 10 seconds to restore the access code to 0000.

MENU LANGUAGE

TV

1 Select “LANGUAGE”	- TV SETUP -
Press [SETUP].	CHANNEL SET UP
Press [K/L] to point to “LAN-	V-CHIP SET UP
	CAPTION [OFF]
	B LANGUAGE [ENGLISH]
GUAGE”.

2Select “ENGLISH”, “ESPAÑOL” or “FRANÇAIS”

Press [ENTER] repeatedly to select “ENGLISH”, “ESPAÑOL”= Spanish or “FRANÇAIS”= French.

3Exit the Language mode

Press [SETUP] to exit the menu.

NOTES:

•This function effects only the language on the screen menu and not the audio source.

•If for some reason the menu is in Spanish or French, press [SETUP], press [K/L] to point to “IDIOMA [ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then press [ENTER] repeatedly to select desired language, then press [SETUP].

- 17 - EN