FUNAI WV20D5 owner manual Search Function, Track Search Time Search, Title / Chapter Search

SEARCH FUNCTION

TRACK SEARCH TIME SEARCH

CD

There are three ways to begin playback on an Audio CD at a specific track.

Using the Number buttons

1Press the Number buttons to enter the

desired track number.

¡Playback will start at the selected track.

¡For single digit tracks (1-9), press a single number (eg. track 3, press [3]).

¡To play track 26, press [+10], [2], [6].

DVD-V CD

1During playback, press [SEARCH MODE] three times (CD: twice) to display the Time Search on the TV screen.

2Within 30 seconds, enter a desired disc

time using the Number buttons.

¡Playback will start at the specified time.

¡Press [CLEAR] to erase the incorrect input. ¡When there is no need to enter a number, “0”

appears automatically. For example, “ 0 : 0 - : - -” appears in the Time Search display if the total time of the track or title is less than 10 minutes.

Using [SEARCH MODE]

1Press [SEARCH MODE].

¡The track search display appears.

2Within 30 seconds, select the desired track

number using the Number buttons.

¡For single digits press [0] first, if the total track of the disc is 10 tracks or more.

¡Playback will start at the selected track.

Using [SKIP H / G ]

During playback, press [SKIP G] to move the next track. Press it repeatedly to skip subsequent tracks. Press [SKIP H ] to go back to beginning of the cur- rent track. Press it repeatedly to go to the previous tracks.

¡If [SKIP H / G ] is pressed while the playback is paused, the playback will be paused again after skipping to the next track.

NOTE:

¡[SKIP H / G ] are not operative when playback is stopped.

TITLE / CHAPTER SEARCH

DVD-V

1Press [SEARCH MODE] once for the Chapter search, twice for the Title search during playback.

_/2

2Enter the desired chapter/title number using

the Number buttons.

¡Playback will start at the selected chapter or title. ¡Press [CLEAR] to erase the incorrect input.

¡For single digits press [0] first, if the total number of chapter or title of the disc is 10 or more.

MARKER SETUP SCREEN

DVD-V CD

Use markers to memorize your favorite places on a disc.

1Press [SEARCH MODE] four times (CD:

three times) during playback.

¡The display screen and Markers will appear on the TV screen.

2Press [s / B] to select 1, 2, 3, 4, 5, 6, 7, 8, 9,

or 10 and ensure that “- - - - : - - : - -” appears in the display.

3When you reach the desired point, press [ENTER].

¡The Title or Track and elapsed playing time will appear in the TV screen.

4To return to the Marker later, press [SEARCH MODE] four times (CD: three times) during playback and press [s / B] to choose the desired marker, then press

[ENTER].

NOTES:

¡Operations which erase all Markers:

–Opening the disc tray.

–Turning off the power.

–Pressing [SELECT].

–Selecting “AC” at step 2 and pressing [ENTER]. ¡To clear a marker:

–Press [s / B] to select a cursor on to the marker

number and press [CLEAR]. ¡You can mark up to 10 points.

5Press [SEARCH MODE] or [RETURN] to exit.

- 22 - EN