TV Mode
4. TV Mode
Remote Control: TV Functions
This section explains how to set up the TV for either cable or antenna reception and how to edit the list of channels available for viewing by using
Make sure that the iCEBOX is connected to a TV cable or that the antenna is installed. See “Connecting the TV Cable or Antenna” beginning on page 4 for information on installing the cable and the antenna.
To watch TV on the iCEBOX, press the TV button on the remote control or keyboard. Pressing TV will turn on the power in TV Mode.
•To switch between TV and another mode, such as Internet or Monitor, press the desired mode button on either the remote control or keyboard.
•To turn off the power press the ON/OFF button on the remote control.
The remote control is illustrated below in Figure 13 with descriptions of button functions in TV Mode. Unidentified buttons do not function in TV Mode. (Buttons on the right side of the keyboard duplicate remote control functions.) You may also refer to the separate Remote Control and Keyboard Guide for more information about using the remote control.
Power on/off
Press to raise or lower the sound
level
Figure 13. Remote Control: TV functions
Press to turn on TV
For Options functions only. Press directional buttons to navigate on-screen menus. Press GO to select a menu item.
Press to display on screen menus (to adjust settings)
Press to select next higher or lower channel
Press to mute sound Press again to restore sound
Press to enter TV channel numbers
12 | ©iCEBOX, LLC, September 2001 |