BATTERY REPLACEMENT
NOTE: Before using remote after installation, remove the battery plastic protective slip.
Remote Controller
+ side Battery
Latch | Battery Holder |
1.Move the small latch to the right and slide out the battery holder.
2.Remove old battery and replace it with a new battery (CR2025) with the positive “+” sign facing as shown above.
3.Push battery holder back into its compartment until it is locked.
PRECAUTIONS
1.Properly dispose of used battery.
2.Do not misuse battery by shorting the positive “+” and negative
3.If the remote is not to be used for a long period, remove the battery from the remote to prevent damage from battery leakage.
4.To avoid accidents, prevent children from playing with the battery.
14 | © 2005 Directed Electronics, Inc. all rights reserved |
|